All Categories
Stormcure Accelerator is used with Stormsure Flexible Repair Adhesive to help reduce the cure time from 24 hours down to approximately 1 hour.
You can use Stormcure with any one of Stormsure's Repair Kits.
Mix the accelerator with a ratio of 1:5. One part accelerator : Five parts adhesive.
1ml of Accelerator : 5ml(5g) Adhesive
The 30ml bottle will be enough to accelerate:
2 x 90g tubes of Stormsure Flexible Repair Adhesive
10 x 15g tubes of Stormsure Flexible Repair Adhesive
30 x 5g tubes of Stormsure Flexible Repair Adhesive
Directions:
Squeeze the adhesive into a suitable container, plate, tray. Then add the accelerator. Mix thoroughly the adhesive and accelerator quickly with a spatula or something similar and then paint or apply it directly onto the surface you want to repair.
Wait for 1 - Hour.
You should start to see the adhesive cured much faster than normal.
Stormcure can be used to preclean a surface and clean up afterwards.
It can also be used for thinning the adhesive to a thinner viscosity.
N.B. The container, plate, tray you use to mix with, will probably have to be thrown away so don't use anything valuable.