Stormsure's 1-Hour Repair

Stormcure Accelerator is used with Stormsure Flexible Repair Adhesive to help reduce the cure time from 24 hours down to approximately 1 hour.

You can use Stormcure with any one of Stormsure's Repair Kits.

Mix the accelerator with a ratio of 1:5. One part accelerator : Five parts adhesive.

1ml of Accelerator : 5ml(5g) Adhesive

The 30ml bottle will be enough to accelerate:

2 x 90g tubes of Stormsure Flexible Repair Adhesive
10 x 15g tubes of Stormsure Flexible Repair Adhesive
30 x 5g tubes of Stormsure Flexible Repair Adhesive

Directions:

Squeeze the adhesive into a suitable container, plate, tray. Then add the accelerator. Mix thoroughly the adhesive and accelerator quickly with a spatula or something similar and then paint or apply it directly onto the surface you want to repair. 

Wait for 1 - Hour.

You should start to see the adhesive cured much faster than normal.

Stormcure can be used to preclean a surface and clean up afterwards.

It can also be used for thinning the adhesive to a thinner viscosity.

N.B. The container, plate, tray you use to mix with, will probably have to be thrown away so don't use anything valuable.