SUP Stand Up Paddle Board Repair - 1-Hour Repair - SUP Stand Up Paddle Board Repair Kit + 30ml Stormcure Accelerator - Stormsure’s 1-Hour Repair Solutions

SUP Stand Up Paddle Board Repair Kit (Clear Stormsure Flexible Repair Adhesive 10g + Transparent Tuff Tape Patches and Strip) + 30ml Stormcure Accelerator + Spatula

Easily make durable, effective and waterproof repairs. Repair leaks, cracks and rips on all types of SUP, Surf Boards and many more!

Especially for repairing seams, valves, inlets - all the areas that are under the most stress.

Strong enough to cope with pressures up to 20-25 psi and temperatures up to 90ºC (*depending on thickness of layer of adhesive)

Repairs are permanent, strong, waterproof, flexible and resistant to abrasion (weather and water abrasion). Clear Stormsure Flexible Repair Adhesive will create a strong bond resulting in a long-lasting repair.

You don't need to buy new, repair with Stormsure adhesive. Cover, renovate and seal perished areas.

Use Stormcure Accelerator with Clear Stormsure Flexible Repair Adhesive to help reduce the cure time from 24 hours down to approximately 1 hour.

Mix Ratio = 1ml of Accelerator : 5ml(5g) Adhesive

Squeeze the adhesive into a suitable container, plate, tray. Then add the accelerator. Mix the adhesive and accelerator thoroughly and quickly with the spatula and then paint or apply it directly onto the surface you want to repair. Wait for 1 - Hour. You should start to see the adhesive cure (dry) much faster than normal.

Stormcure can be used to pre-clean a surface and clean up afterwards. It can also be used for thinning the adhesive to a thinner viscosity.

Stormsure Flexible Repair Adhesive is a liquid polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes.

Bonds to virtually all surfaces. It allows bonding rubber, neoprene, latex, gore-tex, fabrics, PVC, wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.

Accelerate Your Repair! Super Fast PU curing adhesive!

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure-sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. 

TUFF Tape is often used as a quick temporary repair if you are out and about, on holiday, on day trips and do not have time to perform the more permanent repair with Stormsure Adhesive.

Use TUFF Tape to quickly repair rips and pin holes in waterproof clothing, fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC, wires and many more…

When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

DIRECTIONS: Ensure that the surface is clean and dry before using. If required, cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate and all air bubbles have been removed.