Stormsure Latex Wrist Seal Repair Kit (Cone Shape)

In stock
Only 12 left
SKU
RKWC
Stormsure
£19.00
Storage Advice
Quick Overview

This kit contains all the components that you need to replace the Cone shaped wrist seal on a drysuit. Full instructions are on the pack. Make a good quality water tight repair at a fraction of the cost of sending the suit away for repair.

 

Stormsure Cone Shaped Wrist Seal

High Quality Latex made in the UK

Size: Medium

Top Cone: 38mm diameter

Bottom Cone: 89mm diameter

Height: 130mm

 

Stormoprene Adhesive

Stormoprene Hypalon Adhesive is a specially formulated 2-part poly-chloroprene based adhesive system for high-performance bonding of Hypalon and other natural and synthetic rubber surfaces that require high strength bonds for use in demanding applications.

Formulated for use in the manufacture and repair of RIBs, inflatable boats, liferafts, diving suits, wet suits and other marine and industrial applications that specify resistance to salt water, oil, fuels etc. 

 

Directions:

1. Cut off the damaged seal, leaving the part of the suit where the factory seal is attached to the fabric. The new seal will be glued over the old factory seal edge.

2. Slide the new seal into the factory edge and put an elastic band or bungee around the suit to keep it in place. Slide some silicone/wax paper under the cut off edge to keep glue from sticking to the seal, or you can put wax on the seal.

3. Clean the edge of the suit and the new seal edge with solvent (the side with the stripes is the inside.) Gently sand paper it to roughen the surface. Do not let the seal stick out too far, as the small end of the seal should not be stretched over it. It might cause the new seal to slide out of position.

4. Slide the seal on over the factory rubber area. You can put elastic bands around to keep the new seal from sliding.

5. Roll back the new seal so that the 2cm edge that was over the old suit is now facing up. Apply a thin layer of Stormoprene Contact Adhesive to each side. Wait 5 minutes and apply a second layer of adhesive to each side. Use a spatula or knife to apply the glue. When the glue is touch dry, roll the new latex seal right into place over the rubber part of the old seal. It bonds instantly. Press firmly over the glue area to ensure full adhesion.

6. Take your time.

More Information
Content

2 x Cone shaped latex seals

1 x Stormoprene Contact Adhesive 90g

1 x Disposable gloves

1 x Glue spatula

SKURKWC
Brightpearl Product ID1108
ColorClear
ManufacturerStormsure
EAN5060219661077
Typical uses

Watersports, Diving

0
Rating:
0% of 100
Write Your Own Review
You're reviewing:Stormsure Latex Wrist Seal Repair Kit (Cone Shape)

About Stormsure

Stormsure Ltd is a British business making and selling special products that are used for repairing and maintaining a huge range of household, industrial and outdoor sporting items. We help you to save money. Rather than replacing leaking shoes, wetsuits and tents, you can make your own repairs which will last for years. Our products are for consumer, trade and industrial use. These include tapes, repair kits and adhesives which are used for the manufacture and the repair industries and by a large number of consumers. We sell mainly through wholesale distributors but you can purchase our products directly from this website.

Stormsure is the main brand from Stormsure Ltd. Stormsure Flexible Repair Adhesive is the Flagship product and where Stormsure begin it's journey 20 years ago. Stormsure Flexible repair Adhesive is our very own formula which works differently to almost all other adhesives on the market today. It's polyurethane composition and moisture curing properties make it completely waterproof, extremely durable and very very strong making it the perfect solution for almost any repair!

Stormsure Flexible Repair Adhesive is an all-around, high-performance adhesive, celebrated for its exceptional strength and versatility. This adhesive is uniquely formulated to provide a durable, flexible bond, making it ideal for a wide array of repair tasks. Its standout feature is the ability to maintain flexibility after curing, which is essential for materials that are constantly under stress or movement, such as outdoor gear, footwear, and sports equipment. Whether it's a tear in a wetsuit, a leak in an inflatable kayak, or a split in a hiking boot, Stormsure offers a reliable solution.

One of the most compelling aspects of Stormsure Flexible Repair Adhesive is its waterproof properties. Once cured, it creates a waterproof seal, making it indispensable for water sports enthusiasts and outdoor adventurers. It adheres effectively to various materials, including rubber, leather, PVC, neoprene, and canvas. This versatility extends its use beyond just outdoor equipment to household repairs and creative DIY projects. Its ease of application makes it accessible to everyone, not just professionals, providing a cost-effective and long-lasting repair solution. Stormsure isn't just about fixing things; it's about extending the life of your belongings and reducing waste, contributing to a more sustainable approach to material usage.