Footwear

It's all about Stormsure Flexible Repair Adhesive

How to Repair using Polyurethane Adhesive

Stormsure Flexible Repair Adhesive is a polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

• Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.
• Bonds to virtually all surfaces. It allows bonding wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.
• Stormsure is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials
• Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use.
• The glue is transparent so it won't normally discolour the objects you need to join.
• Always check for compatibility on fabrics in an inconsipcuous area before making a major repair. It is used for repairs and construction where a very high connection strength is required. It can be used indoors and outdoors and will last for a long time under water too.
• Complete curing time: 10-12 hours. Resistent to temperatures from -30°C to +80°C.
• How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.
• TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. Cured clear adhesive may change to a pale yellow colour when exposed to bright light.

The Science

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15°C - 25°C for best results). Do not use below 5°C.  If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a transparent liquid again and it will work fine. 

This adhesive is a single component moisture curing product.  It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes.

What is it used for?

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Other Characteristics

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

• Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.
• Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding.
• Comes in White, Clear, Khaki and Black. It is used for repairs and constructions where a very high connection strength is required and can be used indoors, outdoors and gor repairs that will be under water..
• This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

How To Use Stormsure

Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 24 hours.

Conclusion

Despite the marginally higher cost of polyurethane adhesives, they do offer plenty of worthwhile benefits. They are well suited for use with a variety of different materials, and their strong adhesion allows single-sided application. Polyurethane adhesives are easy to work with. Polyurethane adhesives are also highly resistant to the elements and can endure heavy contact and impact.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

It's all about Stormsure Flexible Repair Adhesive

The Stormsure Flexible Repair Adhesive Khaki (15g) is a versatile, high-strength adhesive designed for a wide array of repair needs. This clear adhesive is perfect for a multitude of applications, offering a flexible, waterproof, and durable bond. It's ideal for repairing items like outdoor gear, footwear, inflatable items, tents, and much more, ensuring a reliable and long-lasting fix. Especially khaki or brown items where the black adhesive can create an invisible repair. 

Key Features:

• Strong and Flexible Bond: Provides a robust bond that remains flexible once cured, ideal for materials that need to retain elasticity.
• Clear Formula: The adhesive dries clear, making it suitable for repairs where appearance is important, leaving a clean and unobtrusive finish.
• Waterproof and Durable: Once cured, the adhesive creates a waterproof seal, making it perfect for outdoor and water-related repairs.
• Multipurpose Use: Ideal for repairing a wide range of materials, including rubber, leather, PVC, neoprene, canvas, and various fabrics.
• Easy Application: The tube allows for precise application, making it simple to apply the right amount of adhesive exactly where it's needed.

Benefits:

• Versatile Repair Solution: Suitable for everything from patching a tent to fixing a shoe sole or mending an inflatable pool toy.
• Cost-Effective: Saves money by enabling easy repairs instead of needing to replace damaged items.
• Long-Lasting Repairs: Offers a durable solution that withstands wear and tear, as well as exposure to the elements.
• User-Friendly: Easy to use for both quick fixes and more complex repairs.

How to Use:

1. Ensure the surface to be repaired is clean and dry.
2. Apply the adhesive directly to the damaged area.
3. If necessary, press the two surfaces together and remove any excess adhesive.
4. Allow to cure for 24-48 hours (depending on conditions) for optimal strength.

The Stormsure Flexible Repair Adhesive Khaki (15g) is an essential tool for any repair kit, whether at home, in the workshop, or on the go. It's a go-to solution for a diverse range of repair tasks, ensuring that your gear and items remain functional and well-maintained, saving time and money in the long run.

A perfect alternative to Shoe Goo!

Waterproof • Tough • Flexible

Made from Multi-Purpose Industrial Strength Original E6000 Glue

Shoe Glu is a superior no mess adhesive and sealant that easily and permanently repairs all types of footwear. It is widely used by skate boarders to keep their favourite shoes in usable condition. It is made from a synthetic rubber and it adheres to all kinds of materials, so use Shoe Glu to mend rubber soles, tears in canvas or leather tops or to stop shoe laces from fraying. It dries to a waterproof, flexible rubber, so it will repair waders and boots without breaking or cracking.

Directions

Clean damaged area. Apply glue directly over the damage as a layer.

In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured.

Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours.

Perfect for your favourite training shoes.

The Stormsure Boot, Shoe, and Wader Repair Kit is a comprehensive solution for quickly and effectively repairing all types of boots and footwear. This kit combines the strength of Stormsure Flexible Repair Adhesive with the convenience of Tuff Tape patches and a sandpaper piece, providing everything needed to mend leaks, holes, and tears in boots.

Kit Contents:

1. 5g Tube of Clear Stormsure Flexible Repair Adhesive: A powerful, waterproof adhesive that offers a flexible, durable bond, perfect for sealing leaks and repairing soles or damaged areas on footwear.

2. 2x Tuff Tape Round Patches: These self-adhesive patches are easy to apply and provide a strong, waterproof repair for larger damages. They are versatile and can be used on various materials.

3. Small Piece of Sandpaper: For preparing the surface before applying the adhesive or patch, ensuring a better bond and a longer-lasting repair.

Key Features:

1. Versatile Repair Solution: Ideal for all types of boots, including hiking boots, work boots, rubber boots, and more.

2. Durable and Long-Lasting: Both the adhesive and patches provide a repair that is robust and withstands tough conditions.

3. Waterproof Repairs: Ensures that your boots remain dry and comfortable in wet conditions.

4. Easy to Use: No special skills required; the kit is designed for quick and straightforward application.

5. Compact and Portable: Small enough to be carried in a backpack or tool kit, making it perfect for on-the-go repairs.

Benefits:

• Cost-Effective: Extends the life of your footwear, saving money on replacements.
• Quick Fixes: Ideal for emergency repairs or as a permanent solution.
• Strong Adhesion: Repairs are secure and withstand regular wear and tear.
• Clear Adhesive: Maintains the original appearance of your footwear.

How to Use:

1. Clean and dry the area to be repaired.
2. If using the adhesive, apply it directly to the damaged area. For larger repairs, use the Tuff Tape patches.
3. If needed, use the sandpaper to roughen the surface before applying the adhesive or patch.
4. Allow the adhesive to cure for 24 - 48 hours for optimal strength (depending on conditions).

The Stormsure Boot, Shoe and Wader Repair Kit is an essential item for anyone looking to extend the life of their footwear. Whether you're an avid hiker, a construction worker, or just looking to maintain your favorite pair of boots, this kit provides a reliable, effective, and easy-to-use solution for all your boot repair needs.

The Stormsure Boot, Shoe and Wader Repair Kit with Black Glue is a comprehensive and specialised solution for repairing all types of footwear, particularly boots, shoes, and waders, especially where a color-matched repair is preferred. This kit includes a tube of black Stormsure Flexible Repair Adhesive, Tuff Tape round patches, and sandpaper, offering a complete set for mending damages effectively and discreetly.

Kit Contents:

1. 5g Tube of Black Stormsure Flexible Repair Adhesive: A high-strength, waterproof adhesive that provides a durable and flexible bond, perfect for seamless repairs on darker materials.

2. 2x Tuff Tape Round Patches: These self-adhesive patches are easy to apply and offer a strong, waterproof repair for larger damages on various materials as well to keep the glue in place if a thick film is needed. 

3. Small Piece of Sandpaper: Useful for preparing the surface before applying the adhesive or patch, ensuring a stronger bond and a more enduring repair.

Key Features:

1. Color-Matched Repairs: The black adhesive blends seamlessly with darker materials, making repairs less noticeable.

2. Versatile and Strong: Suitable for all types of boots, including hiking, work, and rubber boots.

3. Waterproof and Durable: Repairs are robust, withstand harsh conditions, and keep your feet dry.

4. Easy Application: Designed for quick and easy use, making it suitable for both emergency and permanent repairs.

5. Compact Kit: The kit is small enough to carry in a backpack or toolbox, ideal for on-the-spot repairs.

Benefits:

• Economical: Extends the lifespan of your footwear, offering a cost-effective alternative to buying new items.
• Fast and Effective: Perfect for quick repairs, saving time and hassle.
• Strong Bonding: Ensures that repairs hold up against regular wear and tear.
• Discreet Appearance: The black adhesive maintains the original look of darker bits of footwear.

How to Use:

1. Clean and dry the area on the item needing repair.
2. Apply the black adhesive directly to smaller tears or holes. Use the Tuff Tape patches for larger damages.
3. Use the sandpaper to roughen the surface before applying the adhesive or patch for better adhesion.
4. Allow the adhesive to cure for 24 - 48 hours for maximum strength (depending on conditions).

The Stormsure Boot, Shoe and Wader Repair Kit with Black Glue is an indispensable tool for anyone looking to maintain the functionality and appearance of their dark-colored footwear. Whether for hiking, work, or casual wear, this kit provides a practical, robust, and discreet solution for extending the life of your boots.

General mintenance kit for repairing all types of outdoor clothing and footwear.

This unique repair kit comes in a very convnient bag with clip, perfect for outdoor expditions.

This selection of very special adhesive glue, tape, oil and shampoo are one of the few products that can repair leaks, cracks and rips on all coats, trousers, gloves, hats, suits, goggles, glasses, boots, shoes and trainers and many more!
Repairs are permanent, strong, waterproof, flexible and resistant to abrasion (weather and water abrasion).

You don't need to buy new, repair your favourite items with this selection Stormsure products. You can plug the hole or patch the tear or clean materials with this excellent product.

Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete. 
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.

DIRECTIONS:
Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.
TIPS:
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap.
Store partly-used tubes in a deep freezer.

It's all about Stormsure Flexible Repair Adhesive

The Stormsure Flexible Repair Adhesive White (15g) is a versatile, high-strength adhesive designed for a wide array of repair needs. This clear adhesive is perfect for a multitude of applications, offering a flexible, waterproof, and durable bond. It's ideal for repairing items like outdoor gear, footwear, inflatable items, tents, and much more, ensuring a reliable and long-lasting fix. Especially white items where the black adhesive can create an invisible repair. 

Key Features:

• Strong and Flexible Bond: Provides a robust bond that remains flexible once cured, ideal for materials that need to retain elasticity.
• Clear Formula: The adhesive dries clear, making it suitable for repairs where appearance is important, leaving a clean and unobtrusive finish.
• Waterproof and Durable: Once cured, the adhesive creates a waterproof seal, making it perfect for outdoor and water-related repairs.
• Multipurpose Use: Ideal for repairing a wide range of materials, including rubber, leather, PVC, neoprene, canvas, and various fabrics.
• Easy Application: The tube allows for precise application, making it simple to apply the right amount of adhesive exactly where it's needed.

Benefits:

• Versatile Repair Solution: Suitable for everything from patching a tent to fixing a shoe sole or mending an inflatable pool toy.
• Cost-Effective: Saves money by enabling easy repairs instead of needing to replace damaged items.
• Long-Lasting Repairs: Offers a durable solution that withstands wear and tear, as well as exposure to the elements.
• User-Friendly: Easy to use for both quick fixes and more complex repairs.

How to Use:

1. Ensure the surface to be repaired is clean and dry.
2. Apply the adhesive directly to the damaged area.
3. If necessary, press the two surfaces together and remove any excess adhesive.
4. Allow to cure for 24-48 hours (depending on conditions) for optimal strength.

The Stormsure Flexible Repair Adhesive White (15g) is an essential tool for any repair kit, whether at home, in the workshop, or on the go. It's a go-to solution for a diverse range of repair tasks, ensuring that your gear and items remain functional and well-maintained, saving time and money in the long run.