Camping

Special Odour and taste free lubricating oil for all types of Zip.

Apply a small amount along the length of a zip and move the zip puller up and down until it runs freely.

It will help smooth sliding of zip pullers on the teeth when used regularly. This oil is food grade, odourless and taste free.

Zip pull size chart

For repairing small holes and rips in trampolines.

Waterproof • Durable • Clear • Non Flammable

Directions

Clean around the damaged area. For small holes, apply a thick film (1.5mm) of glue over the damaged surface plus an extra 10mm around it and leave to cure. To fix holes larger than 5mm, cover the underside of the hole with sticky tape. Apply the glue over the top surface as a thick film. (The tape holds the glue in place as it cures.) After it has cured, remove the tape and apply another thick film of glue on the underside. Always glue up to 10mm beyond the edges of the hole. Leave for 24 hours for a full cure.

Perfect for repairing your trampoline!

General mintenance kit for repairing all types of outdoor clothing and footwear.

This unique repair kit comes in a very convnient bag with clip, perfect for outdoor expditions.

This selection of very special adhesive glue, tape, oil and shampoo are one of the few products that can repair leaks, cracks and rips on all coats, trousers, gloves, hats, suits, goggles, glasses, boots, shoes and trainers and many more!
Repairs are permanent, strong, waterproof, flexible and resistant to abrasion (weather and water abrasion).

You don't need to buy new, repair your favourite items with this selection Stormsure products. You can plug the hole or patch the tear or clean materials with this excellent product.

Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete. 
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.

DIRECTIONS:
Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.
TIPS:
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap.
Store partly-used tubes in a deep freezer.

It's all about Stormsure Flexible Repair Adhesive

How to Repair using Polyurethane Adhesive

Stormsure Flexible Repair Adhesive is a polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

• Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.
• Bonds to virtually all surfaces. It allows bonding wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.
• Stormsure is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials
• Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use.
• The glue is transparent so it won't normally discolour the objects you need to join.
• Always check for compatibility on fabrics in an inconsipcuous area before making a major repair. It is used for repairs and construction where a very high connection strength is required. It can be used indoors and outdoors and will last for a long time under water too.
• Complete curing time: 10-12 hours. Resistent to temperatures from -30°C to +80°C.
• How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.
• TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. Cured clear adhesive may change to a pale yellow colour when exposed to bright light.

The Science

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15°C - 25°C for best results). Do not use below 5°C.  If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a transparent liquid again and it will work fine. 

This adhesive is a single component moisture curing product.  It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes.

What is it used for?

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Other Characteristics

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

• Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.
• Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding.
• Comes in White, Clear, Khaki and Black. It is used for repairs and constructions where a very high connection strength is required and can be used indoors, outdoors and gor repairs that will be under water..
• This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

How To Use Stormsure

Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 24 hours.

Conclusion

Despite the marginally higher cost of polyurethane adhesives, they do offer plenty of worthwhile benefits. They are well suited for use with a variety of different materials, and their strong adhesion allows single-sided application. Polyurethane adhesives are easy to work with. Polyurethane adhesives are also highly resistant to the elements and can endure heavy contact and impact.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

It's all about Stormsure Flexible Repair Adhesive

How to Repair using Polyurethane Adhesive

Stormsure Flexible Repair Adhesive is a polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

• Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.
• Bonds to virtually all surfaces. It allows bonding wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.
• Stormsure is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials
• Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use.
• The glue is transparent so it won't normally discolour the objects you need to join.
• Always check for compatibility on fabrics in an inconsipcuous area before making a major repair. It is used for repairs and construction where a very high connection strength is required. It can be used indoors and outdoors and will last for a long time under water too.
• Complete curing time: 24 hours. Resistent to temperatures from -30°C to +80°C.
• How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.
• TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. Cured clear adhesive may change to a pale yellow colour when exposed to bright light.

The Science

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15°C - 25°C for best results). Do not use below 5°C.  If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a transparent liquid again and it will work fine. 

This adhesive is a single component moisture curing product.  It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes.

What is it used for?

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Other Characteristics

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

• Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.
• Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding.
• The glue is transparent. It is also available in White, Khaki and Black. It is used for repairs and constructions where a very high connection strength is required and can be used indoors, outdoors and gor repairs that will be under water..
• This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

How To Use Stormsure

Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

Conclusion

Despite the marginally higher cost of polyurethane adhesives, they do offer plenty of worthwhile benefits. They are well suited for use with a variety of different materials, and their strong adhesion allows single-sided application. Polyurethane adhesives are easy to work with. Polyurethane adhesives are also highly resistant to the elements and can endure heavy contact and impact.

View the Stormproof size guide HERE

For wet weather garments and equipment

Stormsure's Stormproof is a spray-on durable water repellent that you should use on outdoor gear such as foul weather clothing, raincoats, woollen coats, hats, breathable jackets, fleeces, tweeds, synthetics, tents and footwear.

• It effectively repels water, oil and soil and works perfectly on nylon, cotton, polyester, wool, leather and more. Water just rolls off the surface without wetting it. 
• To use, simply spray evenly onto your garment and allow to fully dry in a warm place.
• Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.
• Easy spray-on application method for all types of fabrics. Water based, fluorocarbon-free & environmentally responsible

Available in 250ml, 500ml, 1L, 5L and 25L

Unlike some other waterproofing sprays, Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.

• Works great with climatic membranes like GORE-TEX
• Adds or renews water repellency and revives breathability
• Prolongs the life of gear and optimises outdoor performance

View the Stormproof size guide HERE

For wet weather garments and equipment

Stormsure's Stormproof is a spray-on durable water repellent that you should use on outdoor gear such as foul weather clothing, raincoats, woollen coats, hats, breathable jackets, fleeces, tweeds, synthetics, tents and footwear.

• It effectively repels water, oil and soil and works perfectly on nylon, cotton, polyester, wool, leather and more. Water just rolls off the surface without wetting it. 
• To use, simply spray evenly onto your garment and allow to fully dry in a warm place.
• Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.
• Easy spray-on application method for all types of fabrics. Water based, fluorocarbon-free & environmentally responsible

Available in 250ml, 500ml, 1L, 5L and 25L

Unlike some other waterproofing sprays, Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.

• Works great with climatic membranes like GORE-TEX
• Adds or renews water repellency and revives breathability
• Prolongs the life of gear and optimises outdoor performance

View the Stormproof size guide HERE

For wet weather garments and equipment

Stormsure's Stormproof is a spray-on durable water repellent that you should use on outdoor gear such as foul weather clothing, raincoats, woollen coats, hats, breathable jackets, fleeces, tweeds, synthetics, tents and footwear.

• It effectively repels water, oil and soil and works perfectly on nylon, cotton, polyester, wool, leather and more. Water just rolls off the surface without wetting it. 
• To use, simply spray evenly onto your garment and allow to fully dry in a warm place.
• Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.
• Easy spray-on application method for all types of fabrics. Water based, fluorocarbon-free & environmentally responsible

Available in 250ml, 500ml, 1L, 5L and 25L

Unlike some other waterproofing sprays, Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.

• Works great with climatic membranes like GORE-TEX
• Adds or renews water repellency and revives breathability
• Prolongs the life of gear and optimises outdoor performance

For wet weather garments and equipment

Stormsure's Stormproof is a spray-on durable water repellent that you should use on outdoor gear such as foul weather clothing, raincoats, woollen coats, hats, breathable jackets, fleeces, tweeds, synthetics, tents and footwear.

• It effectively repels water, oil and soil and works perfectly on nylon, cotton, polyester, wool, leather and more. Water just rolls off the surface without wetting it. 
• To use, simply spray evenly onto your garment and allow to fully dry in a warm place.
• Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.
• Easy spray-on application method for all types of fabrics. Water based, fluorocarbon-free & environmentally responsible

Available in 250ml, 500ml, 1L, 5L and 25L

Unlike some other waterproofing sprays, Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.

• Works great with climatic membranes like GORE-TEX
• Adds or renews water repellency and revives breathability
• Prolongs the life of gear and optimises outdoor performance

Quickly repair and Waterproofing of seams and needle holes on tents, bivvys, waterproof clothing and anything else that has non-watertight seams.

Stormseal is a water-based aqueous styrene-acrylic type polymer dispersion seam sealer. The liquid soaks into pinholes and leaking seams and dries clear, leaving a flexible and impermeable waterproof surface. 

Contains no VOC’s and is non-toxic. Can be washed off before it has dried. 

Test on a small area first to check compatibility.

This bottle (100ml) should cover 12m of seam (1” wide seam).

Directions

Shake bottle well. Remove cap. Pour Seam Sealer into suitable container, cup or dish.

Use brush supplied to apply as a film directly onto and covering the seam stitching or hole. Stormseal will soak into the stitching or hole. Allow to cure for 15-25 minutes or until clear and dry.

Dries in a few minutes. Dries clear and transparent. Remains flexible and waterproof!

It's all about Stormsure Flexible Repair Adhesive

How to Repair using Polyurethane Adhesive

Stormsure Flexible Repair Adhesive is a polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

• Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.
• Bonds to virtually all surfaces. It allows bonding wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.
• Stormsure is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials
• Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use.
• The glue is transparent so it won't normally discolour the objects you need to join.
• Always check for compatibility on fabrics in an inconsipcuous area before making a major repair. It is used for repairs and construction where a very high connection strength is required. It can be used indoors and outdoors and will last for a long time under water too.
• Complete curing time: 24 hours. Resistent to temperatures from -30°C to +80°C.
• How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 24 hours.
• TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. Cured clear adhesive may change to a pale yellow colour when exposed to bright light.

The Science

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15°C - 25°C for best results). Do not use below 5°C.  If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a transparent liquid again and it will work fine. 

This adhesive is a single component moisture curing product.  It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes.

What is it used for?

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Other Characteristics

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

• Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.
• Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding.
• The glue is transparent. It is also available in White, Khaki and Black. It is used for repairs and constructions where a very high connection strength is required and can be used indoors, outdoors and gor repairs that will be under water..
• This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

How To Use Stormsure

Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

Conclusion

Despite the marginally higher cost of polyurethane adhesives, they do offer plenty of worthwhile benefits. They are well suited for use with a variety of different materials, and their strong adhesion allows single-sided application. Polyurethane adhesives are easy to work with. Polyurethane adhesives are also highly resistant to the elements and can endure heavy contact and impact.

It's all about Stormsure Flexible Repair Adhesive

How to Repair using Polyurethane Adhesive

Stormsure Flexible Repair Adhesive is a polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

• Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.
• Bonds to virtually all surfaces. It allows bonding wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.
• Stormsure is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials
• Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use.
• The glue is transparent so it won't normally discolour the objects you need to join.
• Always check for compatibility on fabrics in an inconsipcuous area before making a major repair. It is used for repairs and construction where a very high connection strength is required. It can be used indoors and outdoors and will last for a long time under water too.
• Complete curing time: 10-12 hours. Resistent to temperatures from -30°C to +80°C.
• How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.
• TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. Cured clear adhesive may change to a pale yellow colour when exposed to bright light.

The Science

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15°C - 25°C for best results). Do not use below 5°C.  If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a transparent liquid again and it will work fine. 

This adhesive is a single component moisture curing product.  It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes.

What is it used for?

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Other Characteristics

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

• Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.
• Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding.
• The glue is transparent. It is also available in White, Khaki and Black. It is used for repairs and constructions where a very high connection strength is required and can be used indoors, outdoors and gor repairs that will be under water..
• This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

How To Use Stormsure

Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 24 hours.

Conclusion

Despite the marginally higher cost of polyurethane adhesives, they do offer plenty of worthwhile benefits. They are well suited for use with a variety of different materials, and their strong adhesion allows single-sided application. Polyurethane adhesives are easy to work with. Polyurethane adhesives are also highly resistant to the elements and can endure heavy contact and impact.

It's all about Stormsure Flexible Repair Adhesive

How to Repair using Polyurethane Adhesive

Stormsure Flexible Repair Adhesive is a polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

• Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.
• Bonds to virtually all surfaces. It allows bonding wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.
• Stormsure is a liquid polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials
• Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use.
• The glue is transparent so it won't normally discolour the objects you need to join.
• Always check for compatibility on fabrics in an inconsipcuous area before making a major repair. It is used for repairs and construction where a very high connection strength is required. It can be used indoors and outdoors and will last for a long time under water too.
• Complete curing time: 24 hours. Resistent to temperatures from -30°C to +80°C.
• How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.
• TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. 

The Science

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15°C - 25°C for best results). Do not use below 5°C.  If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a liquid again and it will work fine. 

This adhesive is a single component moisture curing product.  It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes.

What is it used for?

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Other Characteristics

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

• Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.
• Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding.
• The glue is black. It is also available in White, Khaki and Clear. It is used for repairs and constructions where a very high connection strength is required and can be used indoors, outdoors and gor repairs that will be under water..
• This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

How To Use Stormsure

Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

Conclusion

Despite the marginally higher cost of polyurethane adhesives, they do offer plenty of worthwhile benefits. They are well suited for use with a variety of different materials, and their strong adhesion allows single-sided application. Polyurethane adhesives are easy to work with. Polyurethane adhesives are also highly resistant to the elements and can endure heavy contact and impact.

It's all about Stormsure Flexible Repair Adhesive

The Stormsure Flexible Repair Adhesive Black (15g) is a versatile, high-strength adhesive designed for a wide array of repair needs. This clear adhesive is perfect for a multitude of applications, offering a flexible, waterproof, and durable bond. It's ideal for repairing items like outdoor gear, footwear, inflatable items, tents, and much more, ensuring a reliable and long-lasting fix. Especially black items where the black adhesive can create an invisible repair. 

Key Features:

• Strong and Flexible Bond: Provides a robust bond that remains flexible once cured, ideal for materials that need to retain elasticity.
• Clear Formula: The adhesive dries clear, making it suitable for repairs where appearance is important, leaving a clean and unobtrusive finish.
• Waterproof and Durable: Once cured, the adhesive creates a waterproof seal, making it perfect for outdoor and water-related repairs.
• Multipurpose Use: Ideal for repairing a wide range of materials, including rubber, leather, PVC, neoprene, canvas, and various fabrics.
• Easy Application: The tube allows for precise application, making it simple to apply the right amount of adhesive exactly where it's needed.

Benefits:

• Versatile Repair Solution: Suitable for everything from patching a tent to fixing a shoe sole or mending an inflatable pool toy.
• Cost-Effective: Saves money by enabling easy repairs instead of needing to replace damaged items.
• Long-Lasting Repairs: Offers a durable solution that withstands wear and tear, as well as exposure to the elements.
• User-Friendly: Easy to use for both quick fixes and more complex repairs.

How to Use:

1. Ensure the surface to be repaired is clean and dry.
2. Apply the adhesive directly to the damaged area.
3. If necessary, press the two surfaces together and remove any excess adhesive.
4. Allow to cure for 24-48 hours (depending on conditions) for optimal strength.

The Stormsure Flexible Repair Adhesive Black (15g) is an essential tool for any repair kit, whether at home, in the workshop, or on the go. It's a go-to solution for a diverse range of repair tasks, ensuring that your gear and items remain functional and well-maintained, saving time and money in the long run.

It's all about Stormsure Flexible Repair Adhesive

How to Repair using Polyurethane Adhesive

Stormsure Flexible Repair Adhesive is a polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

• Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.
• Bonds to virtually all surfaces. It allows bonding wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.
• Stormsure is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials
• Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use.
• The glue is transparent so it won't normally discolour the objects you need to join.
• Always check for compatibility on fabrics in an inconsipcuous area before making a major repair. It is used for repairs and construction where a very high connection strength is required. It can be used indoors and outdoors and will last for a long time under water too.
• Complete curing time: 10-12 hours. Resistent to temperatures from -30°C to +80°C.
• How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.
• TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. Cured clear adhesive may change to a pale yellow colour when exposed to bright light.

The Science

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15°C - 25°C for best results). Do not use below 5°C.  If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a transparent liquid again and it will work fine. 

This adhesive is a single component moisture curing product.  It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes.

What is it used for?

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Other Characteristics

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

• Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.
• Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding.
• The glue is transparent. It is also available in White, Khaki and Black. It is used for repairs and constructions where a very high connection strength is required and can be used indoors, outdoors and gor repairs that will be under water..
• This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

How To Use Stormsure

Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

Conclusion

Despite the marginally higher cost of polyurethane adhesives, they do offer plenty of worthwhile benefits. They are well suited for use with a variety of different materials, and their strong adhesion allows single-sided application. Polyurethane adhesives are easy to work with. Polyurethane adhesives are also highly resistant to the elements and can endure heavy contact and impact.

Stormoprene Hypalon Adhesive is a specially formulated 2-part poly-chloroprene based adhesive system for high-performance bonding of Hypalon and other natural and synthetic rubber surfaces that require high strength bonds for use in demanding applications.

Formulated for use in the manufacture and repair of RIBs, inflatable boats, liferafts, diving suits, wet suits and other marine and industrial applications that specify resistance to salt water, oil, fuels etc. 

• Easy to mix two part system supplied with Activator/curing agent.
• Easy to apply by brush or roller.
• Contact bonds in 10-15 minutes, full cure 48 hours.
• Shelf life: 3-12 months unopened tin, mixed adhesive has pot life of 3-4 hours

You can use just the glue (as a single component glue) on many fabrics, but the activator must be mixed with the adhesive when used to stick Hypalon fabric.

Securely bonds Hypalon: developed specifically for bonding Hypalon
Hypalon is ideal for creating marine products because it is hardwearing, yet flexible. It is also resistant to chemicals, extreme temperatures and ultraviolet light. However, these properties also make it difficult to bond. Stormoprene (A3703) ensures a strong bond because it has been developed to take into account the unique properties of Hypalon.

Withstands extreme environmental conditions: heat, chemical and water-resistant
Many Hypalon products are subject to wear and tear; boats, marine fenders and dracone barges are subject to harsh treatment when in unsettled waters, whilst wet suits are placed in and out of sea water and left to dry in the sun. Most adhesives could not withstand such extreme conditions. Stormoprene (A3703) ensures a safe and secure bond in these conditions because it has a temperature resistance of -30°C - 120°C and is resistant to both sea water and chemicals.

Directions:

1. Mix components A (adhesive) & B (curing agent) for approx. five minutes. Ideally, mix in the proportions supplied or by components A & B at a ratio of 100:6 by weight.

2. Apply an even coat of the mixed adhesive to both surfaces with a brush, roller coater or serrated trowel. Allow the adhesive to dry for 5-15 minutes or until it is dry to touch.

Please note: Applying two thin coats of adhesive is preferable to ensure maximum adhesion. Leave the first coat to dry for approximately 20-30 minutes before applying the final coat. Allow the final coat to dry for 5 to 15 minutes.

3. Join the surfaces together using as much pressure as possible. This is to prevent air entrapment. Components may be handled within minutes of being bonded.

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape that is sold as individual pre-cut patches and strips of various shapes and sizes. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. TUFF Tape is very strong and can bind together items just by stretching the tape around the item and using the elasticity to pull the pieces tightly into place. When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

USES: Use TUFF Tape to quickly repair rips in waterproof clothing, ripped netting and fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC curtain sides on trucks and warehouses.

DIRECTIONS: Ensure that the surface is clean and dry before using. Cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.

Stormcure Accelerator is used with Stormsure Flexible Repair Adhesive to help reduce the cure time from 24 hours down to approximately 1 hour.

Mix the accelerator with a ratio of 1:5. One part accelerator : Five parts Adhesive.

1ml of Accelerator : 5ml(5g) Adhesive

The 250ml bottle will be enough to accelerate:

16 x 90g tubes of Stormsure Flexible Repair Adhesive
80 x 15g tubes of Stormsure Flexible Repair Adhesive
2400 x 5g tubes of Stormsure Flexible Repair Adhesive

Directions:
Squeeze the adhesive into a suitable container, plate, tray. Then add the accelerator. Mix the adhesive and accelerator quickly with a spatula or something similar thoroughly and then paint or apply it directly onto the surface you want to repair. 

You should start to see the adhesive cured much faster than normal.

Also use it to preclean a surface and clean up afterwards.

N.B. The container, plate, tray you use to mix with, will probably have to be thrown away so don't use anything valuable.

CAN NOT to be sent by MAIL. Courier Only in Tins.

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape that is sold as individual pre-cut patches and strips of various shapes and sizes. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. TUFF Tape is very strong and can bind together items just by stretching the tape around the item and using the elasticity to pull the pieces tightly into place. When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

USES: Use TUFF Tape to quickly repair rips in waterproof clothing, ripped netting and fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC curtain sides on trucks and warehouses.

DIRECTIONS: Ensure that the surface is clean and dry before using. Cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape that is sold as individual pre-cut patches and strips of various shapes and sizes. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. TUFF Tape is very strong and can bind together items just by stretching the tape around the item and using the elasticity to pull the pieces tightly into place. When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

USES: Use TUFF Tape to quickly repair rips in waterproof clothing, ripped netting and fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC curtain sides on trucks and warehouses.

DIRECTIONS: Ensure that the surface is clean and dry before using. Cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape that is sold as individual pre-cut patches and strips of various shapes and sizes. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. TUFF Tape is very strong and can bind together items just by stretching the tape around the item and using the elasticity to pull the pieces tightly into place. When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

USES: Use TUFF Tape to quickly repair rips in waterproof clothing, ripped netting and fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC curtain sides on trucks and warehouses.

DIRECTIONS: Ensure that the surface is clean and dry before using. Cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.

EAN: 5060219660667