Home & Garden

General mintenance kit for repairing all types of outdoor clothing and footwear.

This unique repair kit comes in a very convnient bag with clip, perfect for outdoor expditions.

This selection of very special adhesive glue, tape, oil and shampoo are one of the few products that can repair leaks, cracks and rips on all coats, trousers, gloves, hats, suits, goggles, glasses, boots, shoes and trainers and many more!
Repairs are permanent, strong, waterproof, flexible and resistant to abrasion (weather and water abrasion).

You don't need to buy new, repair your favourite items with this selection Stormsure products. You can plug the hole or patch the tear or clean materials with this excellent product.

Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete. 
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.

DIRECTIONS:
Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.
TIPS:
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap.
Store partly-used tubes in a deep freezer.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

FLEXIBOND Vinyl Acetate Ethylene (VAE) is a type of water-based adhesive that is known for its high bonding strength and resistance to water, heat, and chemicals. Flexibond is composed of a polymer blend of vinyl acetate and ethylene, and it is often used in applications where a strong and durable bond is required, such as in woodworking, furniture manufacturing, and paperboard lamination.

Compared to other adhesives, Flexibond is considered to be a more environmentally friendly option because it contains fewer volatile organic compounds (VOCs) and has a lower carbon footprint. It is also non-toxic and odourless, making it a safer choice for use in indoor environments.

FLEXIBOND Vinyl Acetate Ethylene (VAE) Copolymers are formed by the copolymerisation of vinyl acetate and ethylene. Flexibond offers unique moisture resistance, flexibility, improved tack and adhesion in low temperature and wet conditions. It adheres well to non porous surfaces like vinyl, aluminium, glass etc. 

Copolymers of FLEXIBOND Vinyl Acetate Ethylene (VAE or EVA) are ideal polymeric binders for paper & packaging applications. Their special chemistry makes it easy to serve the market drivers in the adhesives industry.

Vinyl acetate is a hard, rigid, hydrophilic polymer. Ethylene is very soft, non-polar and hydrophobic. Together, they make perfect partners for copolymerisation. VAE (EVA) copolymers are notable for their excellent adhesion to a variety of substrates, great versatility and very low migration potential.

These benefits are provided by the ethylene, which works as an internal plasticiser and used to set the softness and permanent flexibility, without the need for additional plasticisers.

VAE adhesives and PVA adhesives are two different types of adhesives used in the construction and woodworking industries. While both adhesives are commonly used for bonding wood and other porous substrates, they differ in their chemical composition and properties.

VAE versus PVA adhesives

PVA Adhesives

PVA adhesive (Polyvinyl Acetate) is another type of water-based adhesive that is known for its ease of use, safe to handle and low cost. PVA adhesive is composed of a synthetic polymer made from vinyl acetate monomer, and it is often used in applications where a low-to-medium strength bond is required, such as in bookbinding, paper packaging, and labeling. As a water-based adhesive, PVA is easy to clean. PVA glue doesn’t emit strong fumes, reducing the need for additional ventilation. PVA adhesive glue is a cost-effective commercial adhesive.

PVAs can be found in an incredible number of everyday products including: –

Corrugated cases
Books
Kitchen worktops
Toilet rolls
Paper bags
Beds & Sofas
Printed cartons
Postal tubes
Doors

VAE Adhesives

VAE adhesives are widely used for paper packaging, bookbinding and furniture manufacture. Whilst they are identical in appearance to PVAs – differences in their chemical characteristics make them much more suitable for bonding difficult materials such as packaging films, printed and varnished boards and furniture films. They are higher in cost than PVAs, easy to use and safe to handle.

VAEs can be found in an incredible number of everyday products including: –

Printed & varnished cartons
Books
Envelopes
Film fronted bags
Furniture and decoration
Window cartons
Presentation tubes
Files & folders
Paint and coating
Construction

VAE Adhesives offer the following advantages versus PVA adhesives

VAE adhesives provide better bonds to difficult surfaces such as varnished and laminated papers/boards.

VAE’s provide a higher initial tack which is important in all high-speed applications, particularly where there is limited compression time

Have a more flexible final glue film providing improved performance at low temperature.  This makes them particularly suitable for manufacturing paper/cardboard deep freeze packaging for the food industry.

While both VAE and PVA adhesives are water-based and commonly used in woodworking and paper industries, they differ in their chemical composition, strength, and cost.

What is Silicone?

• Stormsure Silicone is a Non-Staining No Oily Residue Silicone Adhesive and Sealant (Not all silicone adhesives are non-staining).

• Highly water repellent

• Highly resistant to weathering and ageing

• Electrically insulating Environmentally friendly, both in its production and in its application

• Resistant to many acids and other chemicals

Using silicone as a seam sealer: This type of sealer is ideal for outdoor gear and clothing made from synthetic materials. It's waterproof and flexible, making it ideal for sealing seams exposed to rain and other elements.

It is also ideal for sealing brickwork, tiles, slabs and concrete.

Advantages and Disadvantages of Silicone-Based Adhesives

A silicone rubber adhesive offers the user many different advantages:

PROS

• Temperature-resistant in a range from -85° to 572° Fahrenheit (-65° to 300° Celsius).

• Suitable for outdoor and indoor use

• Waterproof

• High UV and weathering resistance

• Highly elastic, making it suitable for bonding materials with different coefficients of thermal expansion, as well as for bonding vibrating parts Electrical non-conductor

CONS

Cannot withstand very high vibrations and strong movement loads in the long term due to its elasticity

One-component silicone adhesives generally not suitable for high-strength bonding that must withstand large loads on a permanent basis – over time, the silicone may wear and come loose

Cannot be painted over Produce an unpleasant odour of vinegar during curing phase

What is it used for?

The areas of application for silicone adhesives are diverse. For example, materials can be reliably bonded together, especially outdoors, where the adhesive seam must be weather-resistant and waterproof. Bonding and attaching tiles is also no problem with a silicone rubber adhesive. The following materials are reliably bonded with silicone-based glues:

• Outdoor gear and clothing made from synthetic materials

• Sealing seams exposed to rain and other elements

• Wood

• Glass

• Various plastics

• Metal

• Ceramics

• Enamel

• Paper and cardboard

• Brickwork, tiles, slabs, concrete

• Bathroom and kitchen sealant

Many users place particular emphasis on the ease of processing and flexibility of silicone, which is ideal for bonding substrates that are permanently exposed to vibrations or temperature fluctuations, such as:

• Parts on automobiles

• Fastening of illuminant parts

• Computer components

• Kitchen parts, for example on ovens or other electrical appliances

Preparation

Before you can bond the silicone, you must clean the substrates thoroughly. These must be free of any dirt, dust, oil, and grease. Any old grout must also be removed before you can bond new tiles with silicone, for example. The tiles to be laid or the other substrates can be cleaned with by rinsing it with water, but also with isopropanol or acetone.

Allow the surfaces to dry completely before starting the silicone bonding process. If the substrates show very uneven areas, these must still be filled or the surrounding raised areas must be ground down. Silicone is not suitable for bridging large gaps during the bonding process.

The Bonding Process

Before you apply the silicone adhesive to the actual substrates, it is recommended that you practice on a piece of cardboard. If the handling works well, you can apply the silicone to the substrates. Silicone can now be applied to one side of the entire surface to be bonded. If it is a large area, set the silicone more generously, but not too thickly. You can spread it out using a spatula.

Curing time should be 4-6 hours. But leave for 24 hours for complete cure.

The Finish

Stormsure is a NON-Staining Silicone Adhesive and Sealant.

Click here to read more on how to use Stormsure Silicone as a sealant

Works great on photos, Models, Prototypes, Foam Board & Paper.

• Acid Free
• Photo Safe
• Permanent
• Quick, Easy & Clean
• Disposable, Non-refillable

The PVC and Vinyl Repair Kit is an expertly designed repair solution for a wide range of PVC and vinyl items. This comprehensive kit includes three tubes of specialist heavy-duty PVC adhesive and three commercial-grade vinyl patches, making it perfect for mending tears, holes, and leaks with professional-level results.

Kit Contents:

1. 3 Tubes of Specialist Heavy-Duty PVC Adhesive: Specially formulated to provide a strong, waterproof bond for PVC materials, this adhesive is ideal for repairing inflatables, tarps, pool liners, and more.

2. 3 Commercial-Grade Vinyl Patches (130mm x 80mm): These large, durable patches are designed to cover and repair significant damages, ensuring a robust and long-lasting fix.

Key Features:

1. Strong Bonding Capacity: The heavy-duty adhesive is capable of bonding PVC and vinyl materials effectively, offering a repair that lasts.

2. Waterproof Repairs: Ideal for items exposed to water, the adhesive and patches create a waterproof seal, restoring the item's functionality.

3. Versatile Use: Suitable for a wide range of PVC and vinyl products, including inflatable toys, air mattresses, pool liners, and outdoor gear.

4. Large Patches: The size of the patches allows for coverage of substantial tears or holes.

5. Easy to Apply: The kit is user-friendly, enabling quick and effective repairs without the need for professional assistance.

Benefits:

• Economical: Provides a cost-effective alternative to replacing expensive PVC and vinyl items.
• Quick and Efficient Repairs: Saves time and hassle by offering an immediate repair solution.
• Durable and Reliable: Ensures that repairs withstand regular use and exposure to elements.
• Practical and Handy: Ideal for home use, as well as for camping, boating, or other outdoor activities.

How to Use:

1. Exhaust the air from the inflatable product fully, clean the air leakage (damaged) area completely and remove all dirt. Sandpaper are if possible.

2. Take out the repair patch, pay attention that the patch should be a few centimetres larger than the damaged area. Cut rounded corners on the patch because sharp corners are more likely to catch and peel.

3. Apply a layer of PVC repair glue on the damaged area and the repair patch evenly.

4. While the glue is still wet apply the repair patch with the glue side to the damaged area,.Press firmly to ensure good contact. Ensure the patch is kept pressed onto the damaged area while the glue cures. (Use a weight if necessary).

5. Apply a little glue around the edges of repair patch after 12 hours (not always necessary).

6. The repair is complete after 24 hours. Now you can re-inflate the item!

The PVC and Vinyl Repair Kit is an essential tool for anyone looking to quickly and efficiently repair a variety of PVC and vinyl items. Whether you're dealing with a puncture in an inflatable pool toy or a tear in a vinyl tarp, this kit provides a reliable and lasting solution, ensuring your items are as good as new.

A strong balsa cement that is fuel proof once dry Use for balsa wood and other light woods Fast drying

Usage
A quick drying transparent cement for balsa, other soft woods and cork.

Substrate
Balsa, other soft woods and cork.

Coverage
Depends on thickness of application.

Application
Directly onto substrate.

Drying time
20-30 minutes. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity.

How to clean:
Excess cement should be wiped away using a damp cloth. Product is permanent once dry.

HMG B72 Acrylic Adhesive is touch dry in 3-5 minutes, surface dry in 1 hour and hard dry in around 6 hours.

Not having instant grab, fragments can be easily re-adjusted and surplus adhesive removed with acetone, making any joint virtually invisible. 

The Stormsure Trampoline Repair Kit is a specialised repair solution for mending trampolines, ensuring they remain safe and enjoyable for use. This kit is equipped with a 15g tube of clear Stormsure adhesive and two durable patches, providing a reliable fix for tears and holes in the trampoline mat.

Kit Contents:

1. 15g Tube of Clear Stormsure Flexible Repair Adhesive: A robust, waterproof adhesive that forms a strong, flexible bond, perfect for repairing small cuts and holes in the trampoline mat.

2. 2x Tuff Tape Patches: These patches are designed to cover and repair larger tears or holes, ensuring a secure and long-lasting fix.

Key Features:

1. Effective on Trampoline Materials: Specifically formulated to work on the fabrics used in trampoline mats.

2. Strong and Flexible Repairs: The adhesive and patches create a repair that withstands the stretching and bouncing associated with trampoline use.

3. Waterproof: Ideal for outdoor trampolines, the repair withstands exposure to the elements.

4. Easy Application: The kit is designed for easy use, enabling quick and hassle-free repairs.

Benefits:

• Cost-Effective: Extends the life of the trampoline, avoiding the need for costly replacements.
• Quick Repair Solution: Perfect for fixing damages promptly, reducing downtime.
• Durable Repair: Ensures the trampoline remains safe and usable for a long time.
• Clear Adhesive: Maintains the appearance of the trampoline mat.

How to Use:

1. Clean the area around the tear or hole in the trampoline mat.
2. Apply the clear adhesive to smaller damages directly. For larger tears, apply the adhesive and then place a patch over the area.
3. Press the patch firmly to ensure a secure bond.
4. Allow the adhesive to cure completely before using the trampoline again.

The Stormsure Trampoline Repair Kit is an invaluable tool for any trampoline owner, providing a simple yet effective solution for repairing common mat damages. Whether it's a small puncture or a larger tear, this kit ensures that your trampoline remains safe and enjoyable for everyone.

Click here to see How to Repair a Hole or Tear in a Trampoline Mat

The Inflatables Repair Kit is an all-encompassing solution designed for repairing a wide range of inflatable items, from pool toys and air mattresses to inflatable boats and bounce houses. This kit includes a 5g tube of specialized adhesive, two Tuff Tape patches, and a Tuff Tape strip, providing everything needed to fix punctures, tears, and leaks efficiently.

Kit Contents:

1. 5g Stormsure Flexible Repair Adhesive: A robust adhesive that bonds strongly with inflatable materials, ensuring airtight and watertight repairs for a variety of PVC and vinyl items.

2. 2x Tuff Tape Patches (75mm diameter): These self-adhesive patches are perfect for sealing larger damages, providing a secure and durable repair solution for inflatable items.

3. 1x Tuff Tape Strip (15cm long): A flexible strip of Tuff Tape, ideal for repairing elongated tears or seam issues on inflatables.

Key Features:

1. Broad Application: Suitable for a diverse range of inflatable products, including children's pool toys, air beds, and inflatable boats.

2. Strong and Waterproof Repairs: The adhesive and patches create a bond that withstands pressure and exposure to water.

3. Simple to Use: The kit is designed for easy application, allowing for quick repairs without the need for professional tools or skills.

4. Compact and Portable: Its small size makes it a convenient addition to camping gear, beach bags, or emergency repair kits.

5. Maintains Inflatable Integrity: Helps extend the life of inflatable items, preserving their usability and safety.

Benefits:

• Cost-Effective: Saves money by repairing instead of replacing expensive inflatables.
• Quick Fix Solution: Ideal for emergency repairs, restoring the functionality of inflatable items rapidly.
• Durable Repair: Ensures that inflatables can continue to be used safely and effectively.
• Easy to Carry: Its lightweight and compact nature make it a must-have for holidaymakers and outdoor enthusiasts.

How to Use:

1. Clean and dry the area of the inflatable needing repair.
2. Apply the adhesive to smaller punctures or cuts. For larger damages, use a Tuff Tape patch or the strip over the adhesive.
3. Press firmly to ensure a good bond.
4. Allow the repair to cure completely for 24 - 48 hours before reinflating the item.

The Inflatables Repair Kit is an indispensable tool for anyone who frequently uses inflatable products. Whether it’s a small hole in a beach ball or a significant tear in an air mattress, this kit provides a fast, effective, and reliable solution, ensuring your inflatable items remain functional for all your recreational or relaxation needs.

For repairing small holes and rips in trampolines.

Waterproof • Durable • Clear • Non Flammable

Directions

Clean around the damaged area. For small holes, apply a thick film (1.5mm) of glue over the damaged surface plus an extra 10mm around it and leave to cure. To fix holes larger than 5mm, cover the underside of the hole with sticky tape. Apply the glue over the top surface as a thick film. (The tape holds the glue in place as it cures.) After it has cured, remove the tape and apply another thick film of glue on the underside. Always glue up to 10mm beyond the edges of the hole. Leave for 24 hours for a full cure.

Perfect for repairing your trampoline!

A versatile tape coated with strong adhesive on both sides, easy to tear and special backing paper makes application easier. Ideal for mounting displays, crafts, and more.

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape that is sold as individual pre-cut patches and strips of various shapes and sizes. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. TUFF Tape is very strong and can bind together items just by stretching the tape around the item and using the elasticity to pull the pieces tightly into place. When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

USES: Use TUFF Tape to quickly repair rips in waterproof clothing, ripped netting and fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC curtain sides on trucks and warehouses.

DIRECTIONS: Ensure that the surface is clean and dry before using. Cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape that is sold as individual pre-cut patches and strips of various shapes and sizes. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. TUFF Tape is very strong and can bind together items just by stretching the tape around the item and using the elasticity to pull the pieces tightly into place. When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

USES: Use TUFF Tape to quickly repair rips in waterproof clothing, ripped netting and fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC curtain sides on trucks and warehouses.

DIRECTIONS: Ensure that the surface is clean and dry before using. Cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.

Provides fast, strong, permanent bond in seconds to almost all non-pourous surfaces.

Dries clear. Use on fingernails, jewellery, craft products and more.

Apply just one drop per square inch for maximum sttrength.

Comes in a 2g tube

Cements almost anything to anything.

Waterproofs and insulates.

Never becomes brittle.

Bonds plastic, crockery, wood, metal, tile, cork, china, fabric, and others.

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape that is sold as individual pre-cut patches and strips of various shapes and sizes. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. TUFF Tape is very strong and can bind together items just by stretching the tape around the item and using the elasticity to pull the pieces tightly into place. When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

USES: Use TUFF Tape to quickly repair rips in waterproof clothing, ripped netting and fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC curtain sides on trucks and warehouses.

DIRECTIONS: Ensure that the surface is clean and dry before using. Cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape that is sold as individual pre-cut patches and strips of various shapes and sizes. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. TUFF Tape is very strong and can bind together items just by stretching the tape around the item and using the elasticity to pull the pieces tightly into place. When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

USES: Use TUFF Tape to quickly repair rips in waterproof clothing, ripped netting and fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC curtain sides on trucks and warehouses.

DIRECTIONS: Ensure that the surface is clean and dry before using. Cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.

Tesa 4323 general purpose paper masking tape is finely creped with a natural rubber adhesive.

MULTI PURPOSE

A synthetic rubber glue which sticks to many surfaces. Cures in 6-10 hours. Non Flammable, Waterproof and abrasion resistant.

Directions

Clean damaged area. Apply glue directly over the damage as a layer. In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured. Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours. 

Waterproof Flexible Repair Adhesive

MULTI PURPOSE

Directions

Clean damaged area. Apply glue directly over the damage as a layer. In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured. Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours. Suitable for canvas, leather, nubuck, synthetic materials, polyester, nylon, rubber and more. Perfect for your favourite training shoes.