Motoring

Medium strength thread-locking material that cures, locks and seals between threaded connections

Prevents corrosion and the loosening of nuts and bolts

Set time: 15 minutes; Cure time: 24 hours

Resists leakage, shock and vibration

Disassemble with normal hand tools

Tensile Strength: 1600 psi

Temperature Range: -65°F to +300°F

Chemical Solvent Resistance to gasoline, motor oil, break fluids, transmission fluids, grease, alcohol and antifreeze mixtures

VersaChem - Clear Weld Epoxy 25ml - 47609 30 Minute set time. Extra strong. Super high strength 2500psi.

Waterproof.

Resists most liquids including gasoline, water, antifreeze mixtures and oil.

Clear in colour.

A favourite of RC cars enthusiasts.

By changing the silicon oil viscosity you can change the compression rate of the shock absorber

NOTE:
50 CST is less viscous than water
100 CST is a similar viscosity to water
5000 CST is much more viscous than water

Versachem Anti-Seize Thread Lubricant is a high temperature semi-synthetic grease that helps to reduce wear in heavy pressure applications.

This formula features a high percentage of premium quality, micro-fine copper flakes fortified with high quality rust and corrosion inhibitors, and helps to prevent galling, corrosion, sticking and seizing.

Use during assembly to assure easier disassembly. This copper color lubricant is waterproof, non-flammable, oxygen sensor safe, resistant to automotive fluids, and provides good electrical conductivity.

Assemblies where high pressure water machines are used, reapply Anti-Seize as needed because high pressure water will wash the lubricant away. Temperature Range: -30F to +2000F.

High Quality Medium Strength Thread Lock

Locks and seals between threads Prevents vibrating, shock or working loose

Protects against Corrosion Works on Nuts or Bolts

Medium Strength, fittings can be removed again with hand tools

Chemical and Solvent Resistant including Petrol, Oil, Brake Fluid, Trans Fluid, Grease, Alcohol, and Antifreeze

Specification:

Colour : Blue

Set Time : 15min

Cure Time : 24h

Temperature Range : -53°c to +148°c

High performance ball bearing oil which has been specially developed for all ball bearings.

Keeps your engine in top condition

Long-term protection

50ml

Optimum filtering

Suitable for all air filters

Clean with model engine oil

Based on natural castor oil

50ml

A favourite of RC cars enthusiasts.

By changing the silicon oil viscosity you can change the compression rate of the shock absorber

NOTE:
50 CST is less viscous than water
100 CST is a similar viscosity to water
5000 CST is much more viscous than water

A favourite of RC cars enthusiasts.

By changing the silicon oil viscosity you can change the compression rate of the shock absorber

NOTE:
50 CST is less viscous than water
100 CST is a similar viscosity to water
5000 CST is much more viscous than water

A favourite of RC cars enthusiasts.

By changing the silicon oil viscosity you can change the compression rate of the shock absorber

NOTE:
50 CST is less viscous than water
100 CST is a similar viscosity to water
5000 CST is much more viscous than water

A favourite of RC cars enthusiasts.

By changing the silicon oil viscosity you can change the compression rate of the shock absorber

NOTE:
50 CST is less viscous than water
100 CST is a similar viscosity to water
5000 CST is much more viscous than water

A favourite of RC cars enthusiasts.

By changing the silicon oil viscosity you can change the compression rate of the shock absorber

NOTE:
50 CST is less viscous than water
100 CST is a similar viscosity to water
5000 CST is much more viscous than water

A favourite of RC cars enthusiasts.

By changing the silicon oil viscosity you can change the compression rate of the shock absorber

NOTE:
50 CST is less viscous than water
100 CST is a similar viscosity to water
5000 CST is much more viscous than water

A favourite of RC cars enthusiasts.

By changing the silicon oil viscosity you can change the compression rate of the shock absorber

NOTE:
50 CST is less viscous than water
100 CST is a similar viscosity to water
5000 CST is much more viscous than water