Other Brands

Works great on photos, Models, Prototypes, Foam Board & Paper.

• Acid Free
• Photo Safe
• Permanent
• Quick, Easy & Clean
• Disposable, Non-refillable

Aquatite flexible repair adhesive  is a synthetic rubber compound. It will stick to most surfaces.

When cured for 24 hours Aquatite is flexible, abrasion resistant and very strong.

Whether it’s a hole in your rubber boots or a wobble on your chair leg, Aquatite is the repair adhesive for you. 

This formulation contains a solvent which is Non Flammable so it can be shipped by air without problems.

Waterproof Flexible Repair Adhesive

MULTI PURPOSE

Directions

Clean damaged area. Apply glue directly over the damage as a layer. In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured. Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours. Suitable for canvas, leather, nubuck, synthetic materials, polyester, nylon, rubber and more. Perfect for your favourite training shoes.

MULTI PURPOSE

A synthetic rubber glue which sticks to many surfaces. Cures in 6-10 hours. Non Flammable, Waterproof and abrasion resistant.

Directions

Clean damaged area. Apply glue directly over the damage as a layer. In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured. Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours. 

ZAP GOO is an excellent adhesive for today's high tech composite airplane, boat, and car hobby products, and great for all of those fix-it, mend-it, seal-it, and stick-it jobs around the house.

The excellent shock resistant flexible bond means your parts will stay put even when subject to high vibration and extreme shocks.

ZAP GOO and its ability it stick various materials together makes it great for craft work including wood, clay, plaster, glass, and fabrics.

Helpful Hints:
ZAP GOO takes 24 to 36 hours to full cure and reach maximum strength. All parts to be glued should be clean and dry.Apply GOO to both parts, let dry for 1 to 2 minutes then assemble.Clamp or set aside to dry, do not disturb the bonded joint until dry.When applying GOO, a slight hesitation in pulling the tube away from the glue will prevent stringing. For disassembly, ZAP GOO bonds can be cut with a razor knife.

Vitalbond original wood glue is a leading one-part  wood adhesive designed specifically for woodworking projects. It is ideal for modelling, furniture, cabinet making and trim finishes.

Its bond is stronger than the wood itself, it sets fast with a short clamp time and it is non toxic. It is not designed for use under the waterline.

Devcon Duco Plastic and Model Cement is ideal for bonding polystyrene plastic models and toys. It is good to use removable tape on areas that you do not want the cement to get on. Before the cement cures, remove the tape. Flammable, keep away from heat, sparks and open flame. Dries clear, with a tensile strength of 300 PSI. Temperature Range: 200°F.

Handling time: 10 minutes; Set time: 2 hours; Cure time: 24 hours

100m roll of nylon tape with hot melt adhesive on the back.

Model name: T-1025

Size: 22mm x 100m

Colour: Dark grey

Composition: Woven Nylon tricot with PU coating and hot melt adhesive.

Melt Range: 110-130°C

Wash: 40°C

Directions: Seal into position with a hot iron to cover glued and stitched seams on wetsuits and dry suits, for a perfect finish.

Morphits Polymorph is a hand mouldable thermoplastic, which comes in the form of 2mm white beads.

Melts at 62ºC in hot water or any other heat source. Non-toxic. Mould it into the shape you need and let it cool to room temperature. Recycle it many times by reheating.

Durable, Non-Brittle, Easy to use, Non-Toxic, reusable, biodegradable, Hundreds of uses.

Morphits polymorph is a linear polycaprolactone (PCL) monomer grade with high molecular weight (about 50,000). It is also at printable grade, exhibiting very good biodegradability and resistance to tear, moisture and impact.

Used for DIY, crafts, Repairs and many more…

Provides flexibility, enhanced durability, high elongation and excellent low temperature performance.

Directions: Place a spoonful beads in a cup and add boiling water. The beads quickly melt together and become transparent. The melted plastic can be moulded by hand, rolled out into sheets and stuck onto many surfaces. Polymorph can be reheated and remelted and reused many times over, so it is fully recyclable.

Morphits Polymorph is a hand mouldable thermoplastic, which comes in the form of 2mm white beads.

Melts at 62ºC in hot water or any other heat source. Non-toxic. Mould it into the shape you need and let it cool to room temperature. Recycle it many times by reheating.

Durable, Non-Brittle, Easy to use, Non-Toxic, reusable, biodegradable, Hundreds of uses.

Morphits polymorph is a linear polycaprolactone (PCL) monomer grade with high molecular weight (about 50,000). It is also at printable grade, exhibiting very good biodegradability and resistance to tear, moisture and impact.

Used for DIY, crafts, Repairs and many more…

Provides flexibility, enhanced durability, high elongation and excellent low temperature performance.

Directions: Place a spoonful beads in a cup and add boiling water. The beads quickly melt together and become transparent. The melted plastic can be moulded by hand, rolled out into sheets and stuck onto many surfaces. Polymorph can be reheated and remelted and reused many times over, so it is fully recyclable.

Morphits Polymorph is a hand mouldable thermoplastic, which comes in the form of 2mm white beads.

Melts at 62ºC in hot water or any other heat source. Non-toxic. Mould it into the shape you need and let it cool to room temperature. Recycle it many times by reheating.

Durable, Non-Brittle, Easy to use, Non-Toxic, reusable, biodegradable, Hundreds of uses.

Morphits polymorph is a linear polycaprolactone (PCL) monomer grade with high molecular weight (about 50,000). It is also at printable grade, exhibiting very good biodegradability and resistance to tear, moisture and impact.

Used for DIY, crafts, Repairs and many more…

Provides flexibility, enhanced durability, high elongation and excellent low temperature performance.

Directions: Place a spoonful beads in a cup and add boiling water. The beads quickly melt together and become transparent. The melted plastic can be moulded by hand, rolled out into sheets and stuck onto many surfaces. Polymorph can be reheated and remelted and reused many times over, so it is fully recyclable.

The Inflatables Repair Kit is an all-encompassing solution designed for repairing a wide range of inflatable items, from pool toys and air mattresses to inflatable boats and bounce houses. This kit includes a 5g tube of specialized adhesive, two Tuff Tape patches, and a Tuff Tape strip, providing everything needed to fix punctures, tears, and leaks efficiently.

Kit Contents:

1. 5g Stormsure Flexible Repair Adhesive: A robust adhesive that bonds strongly with inflatable materials, ensuring airtight and watertight repairs for a variety of PVC and vinyl items.

2. 2x Tuff Tape Patches (75mm diameter): These self-adhesive patches are perfect for sealing larger damages, providing a secure and durable repair solution for inflatable items.

3. 1x Tuff Tape Strip (15cm long): A flexible strip of Tuff Tape, ideal for repairing elongated tears or seam issues on inflatables.

Key Features:

1. Broad Application: Suitable for a diverse range of inflatable products, including children's pool toys, air beds, and inflatable boats.

2. Strong and Waterproof Repairs: The adhesive and patches create a bond that withstands pressure and exposure to water.

3. Simple to Use: The kit is designed for easy application, allowing for quick repairs without the need for professional tools or skills.

4. Compact and Portable: Its small size makes it a convenient addition to camping gear, beach bags, or emergency repair kits.

5. Maintains Inflatable Integrity: Helps extend the life of inflatable items, preserving their usability and safety.

Benefits:

• Cost-Effective: Saves money by repairing instead of replacing expensive inflatables.
• Quick Fix Solution: Ideal for emergency repairs, restoring the functionality of inflatable items rapidly.
• Durable Repair: Ensures that inflatables can continue to be used safely and effectively.
• Easy to Carry: Its lightweight and compact nature make it a must-have for holidaymakers and outdoor enthusiasts.

How to Use:

1. Clean and dry the area of the inflatable needing repair.
2. Apply the adhesive to smaller punctures or cuts. For larger damages, use a Tuff Tape patch or the strip over the adhesive.
3. Press firmly to ensure a good bond.
4. Allow the repair to cure completely for 24 - 48 hours before reinflating the item.

The Inflatables Repair Kit is an indispensable tool for anyone who frequently uses inflatable products. Whether it’s a small hole in a beach ball or a significant tear in an air mattress, this kit provides a fast, effective, and reliable solution, ensuring your inflatable items remain functional for all your recreational or relaxation needs.