Other Brands

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

Medium strength thread-locking material that cures, locks and seals between threaded connections

Prevents corrosion and the loosening of nuts and bolts

Set time: 15 minutes; Cure time: 24 hours

Resists leakage, shock and vibration

Disassemble with normal hand tools

Tensile Strength: 1600 psi

Temperature Range: -65°F to +300°F

Chemical Solvent Resistance to gasoline, motor oil, break fluids, transmission fluids, grease, alcohol and antifreeze mixtures

 5 litre container of white PVA glue. Ideal for crafts and school use. A standard wood glue

Uses:

• as wood glue, PVAc is known as "white glue" and the yellow as "carpenter's glue".
• as paper adhesive during paper packaging conversion
• in bookbinding and book arts, due to its flexible strong bond and non-acidic nature (unlike many other polymers). The use of PVAc on the Archimedes Palimpsest during the 20th century greatly hindered the task of disbinding the book and preserving and imaging the pages in the early 21st century, in part because the glue was stronger than the parchment it held together.^[6]
• in handicrafts
• as envelope adhesive
• as wallpaper adhesive
• as a primer for drywall and other substrates

Morphits Polymorph is a hand mouldable thermoplastic, which comes in the form of 2mm white beads.

Melts at 62ºC in hot water or any other heat source. Non-toxic. Mould it into the shape you need and let it cool to room temperature. Recycle it many times by reheating.

Durable, Non-Brittle, Easy to use, Non-Toxic, reusable, biodegradable, Hundreds of uses.

Morphits polymorph is a linear polycaprolactone (PCL) monomer grade with high molecular weight (about 50,000). It is also at printable grade, exhibiting very good biodegradability and resistance to tear, moisture and impact.

Used for DIY, crafts, Repairs and many more…

Provides flexibility, enhanced durability, high elongation and excellent low temperature performance.

Directions: Place a spoonful beads in a cup and add boiling water. The beads quickly melt together and become transparent. The melted plastic can be moulded by hand, rolled out into sheets and stuck onto many surfaces. Polymorph can be reheated and remelted and reused many times over, so it is fully recyclable.