Boats and Ribs Repair Products

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

What is Silicone?

• Stormsure Silicone is a Non-Staining No Oily Residue Silicone Adhesive and Sealant (Not all silicone adhesives are non-staining).

• Highly water repellent

• Highly resistant to weathering and ageing

• Electrically insulating Environmentally friendly, both in its production and in its application

• Resistant to many acids and other chemicals

Using silicone as a seam sealer: This type of sealer is ideal for outdoor gear and clothing made from synthetic materials. It's waterproof and flexible, making it ideal for sealing seams exposed to rain and other elements.

It is also ideal for sealing brickwork, tiles, slabs and concrete.

Advantages and Disadvantages of Silicone-Based Adhesives

A silicone rubber adhesive offers the user many different advantages:

PROS

• Temperature-resistant in a range from -85° to 572° Fahrenheit (-65° to 300° Celsius).

• Suitable for outdoor and indoor use

• Waterproof

• High UV and weathering resistance

• Highly elastic, making it suitable for bonding materials with different coefficients of thermal expansion, as well as for bonding vibrating parts Electrical non-conductor

CONS

Cannot withstand very high vibrations and strong movement loads in the long term due to its elasticity

One-component silicone adhesives generally not suitable for high-strength bonding that must withstand large loads on a permanent basis – over time, the silicone may wear and come loose

Cannot be painted over Produce an unpleasant odour of vinegar during curing phase

What is it used for?

The areas of application for silicone adhesives are diverse. For example, materials can be reliably bonded together, especially outdoors, where the adhesive seam must be weather-resistant and waterproof. Bonding and attaching tiles is also no problem with a silicone rubber adhesive. The following materials are reliably bonded with silicone-based glues:

• Outdoor gear and clothing made from synthetic materials

• Sealing seams exposed to rain and other elements

• Wood

• Glass

• Various plastics

• Metal

• Ceramics

• Enamel

• Paper and cardboard

• Brickwork, tiles, slabs, concrete

• Bathroom and kitchen sealant

Many users place particular emphasis on the ease of processing and flexibility of silicone, which is ideal for bonding substrates that are permanently exposed to vibrations or temperature fluctuations, such as:

• Parts on automobiles

• Fastening of illuminant parts

• Computer components

• Kitchen parts, for example on ovens or other electrical appliances

Preparation

Before you can bond the silicone, you must clean the substrates thoroughly. These must be free of any dirt, dust, oil, and grease. Any old grout must also be removed before you can bond new tiles with silicone, for example. The tiles to be laid or the other substrates can be cleaned with by rinsing it with water, but also with isopropanol or acetone.

Allow the surfaces to dry completely before starting the silicone bonding process. If the substrates show very uneven areas, these must still be filled or the surrounding raised areas must be ground down. Silicone is not suitable for bridging large gaps during the bonding process.

The Bonding Process

Before you apply the silicone adhesive to the actual substrates, it is recommended that you practice on a piece of cardboard. If the handling works well, you can apply the silicone to the substrates. Silicone can now be applied to one side of the entire surface to be bonded. If it is a large area, set the silicone more generously, but not too thickly. You can spread it out using a spatula.

Curing time should be 4-6 hours. But leave for 24 hours for complete cure.

The Finish

Stormsure is a NON-Staining Silicone Adhesive and Sealant.

Click here to read more on how to use Stormsure Silicone as a sealant

View the Stormproof size guide HERE

For wet weather garments and equipment

Stormsure's Stormproof is a spray-on durable water repellent that you should use on outdoor gear such as foul weather clothing, raincoats, woollen coats, hats, breathable jackets, fleeces, tweeds, synthetics, tents and footwear.

• It effectively repels water, oil and soil and works perfectly on nylon, cotton, polyester, wool, leather and more. Water just rolls off the surface without wetting it. 
• To use, simply spray evenly onto your garment and allow to fully dry in a warm place.
• Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.
• Easy spray-on application method for all types of fabrics. Water based, fluorocarbon-free & environmentally responsible

Available in 250ml, 500ml, 1L, 5L and 25L

Unlike some other waterproofing sprays, Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.

• Works great with climatic membranes like GORE-TEX
• Adds or renews water repellency and revives breathability
• Prolongs the life of gear and optimises outdoor performance

View the Stormproof size guide HERE

For wet weather garments and equipment

Stormsure's Stormproof is a spray-on durable water repellent that you should use on outdoor gear such as foul weather clothing, raincoats, woollen coats, hats, breathable jackets, fleeces, tweeds, synthetics, tents and footwear.

• It effectively repels water, oil and soil and works perfectly on nylon, cotton, polyester, wool, leather and more. Water just rolls off the surface without wetting it. 
• To use, simply spray evenly onto your garment and allow to fully dry in a warm place.
• Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.
• Easy spray-on application method for all types of fabrics. Water based, fluorocarbon-free & environmentally responsible

Available in 250ml, 500ml, 1L, 5L and 25L

Unlike some other waterproofing sprays, Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.

• Works great with climatic membranes like GORE-TEX
• Adds or renews water repellency and revives breathability
• Prolongs the life of gear and optimises outdoor performance

View the Stormproof size guide HERE

For wet weather garments and equipment

Stormsure's Stormproof is a spray-on durable water repellent that you should use on outdoor gear such as foul weather clothing, raincoats, woollen coats, hats, breathable jackets, fleeces, tweeds, synthetics, tents and footwear.

• It effectively repels water, oil and soil and works perfectly on nylon, cotton, polyester, wool, leather and more. Water just rolls off the surface without wetting it. 
• To use, simply spray evenly onto your garment and allow to fully dry in a warm place.
• Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.
• Easy spray-on application method for all types of fabrics. Water based, fluorocarbon-free & environmentally responsible

Available in 250ml, 500ml, 1L, 5L and 25L

Unlike some other waterproofing sprays, Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.

• Works great with climatic membranes like GORE-TEX
• Adds or renews water repellency and revives breathability
• Prolongs the life of gear and optimises outdoor performance

View the Stormproof size guide HERE

For wet weather garments and equipment

Stormsure's Stormproof is a spray-on durable water repellent that you should use on outdoor gear such as foul weather clothing, raincoats, woollen coats, hats, breathable jackets, fleeces, tweeds, synthetics, tents and footwear.

• It effectively repels water, oil and soil and works perfectly on nylon, cotton, polyester, wool, leather and more. Water just rolls off the surface without wetting it. 
• To use, simply spray evenly onto your garment and allow to fully dry in a warm place.
• Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.
• Easy spray-on application method for all types of fabrics. Water based, fluorocarbon-free & environmentally responsible

Available in 250ml, 500ml, 1L, 5L and 25L

Unlike some other waterproofing sprays, Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.

• Works great with climatic membranes like GORE-TEX
• Adds or renews water repellency and revives breathability
• Prolongs the life of gear and optimises outdoor performance

For wet weather garments and equipment

Stormsure's Stormproof is a spray-on durable water repellent that you should use on outdoor gear such as foul weather clothing, raincoats, woollen coats, hats, breathable jackets, fleeces, tweeds, synthetics, tents and footwear.

• It effectively repels water, oil and soil and works perfectly on nylon, cotton, polyester, wool, leather and more. Water just rolls off the surface without wetting it. 
• To use, simply spray evenly onto your garment and allow to fully dry in a warm place.
• Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.
• Easy spray-on application method for all types of fabrics. Water based, fluorocarbon-free & environmentally responsible

Available in 250ml, 500ml, 1L, 5L and 25L

Unlike some other waterproofing sprays, Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.

• Works great with climatic membranes like GORE-TEX
• Adds or renews water repellency and revives breathability
• Prolongs the life of gear and optimises outdoor performance

It's all about Stormsure Flexible Repair Adhesive

How to Repair using Polyurethane Adhesive

Stormsure Flexible Repair Adhesive is a polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

• Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.
• Bonds to virtually all surfaces. It allows bonding wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.
• Stormsure is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials
• Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use.
• The glue is transparent so it won't normally discolour the objects you need to join.
• Always check for compatibility on fabrics in an inconsipcuous area before making a major repair. It is used for repairs and construction where a very high connection strength is required. It can be used indoors and outdoors and will last for a long time under water too.
• Complete curing time: 10-12 hours. Resistent to temperatures from -30°C to +80°C.
• How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.
• TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. Cured clear adhesive may change to a pale yellow colour when exposed to bright light.

The Science

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15°C - 25°C for best results). Do not use below 5°C.  If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a transparent liquid again and it will work fine. 

This adhesive is a single component moisture curing product.  It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes.

What is it used for?

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Other Characteristics

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

• Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.
• Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding.
• The glue is transparent. It is also available in White, Khaki and Black. It is used for repairs and constructions where a very high connection strength is required and can be used indoors, outdoors and gor repairs that will be under water..
• This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

How To Use Stormsure

Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

Conclusion

Despite the marginally higher cost of polyurethane adhesives, they do offer plenty of worthwhile benefits. They are well suited for use with a variety of different materials, and their strong adhesion allows single-sided application. Polyurethane adhesives are easy to work with. Polyurethane adhesives are also highly resistant to the elements and can endure heavy contact and impact.

Stormoprene Hypalon Adhesive is a specially formulated 2-part poly-chloroprene based adhesive system for high-performance bonding of Hypalon and other natural and synthetic rubber surfaces that require high strength bonds for use in demanding applications.

Formulated for use in the manufacture and repair of RIBs, inflatable boats, liferafts, diving suits, wet suits and other marine and industrial applications that specify resistance to salt water, oil, fuels etc. 

• Easy to mix two part system supplied with Activator/curing agent.
• Easy to apply by brush or roller.
• Contact bonds in 10-15 minutes, full cure 48 hours.
• Shelf life: 3-12 months unopened tin, mixed adhesive has pot life of 3-4 hours

You can use just the glue (as a single component glue) on many fabrics, but the activator must be mixed with the adhesive when used to stick Hypalon fabric.

Securely bonds Hypalon: developed specifically for bonding Hypalon
Hypalon is ideal for creating marine products because it is hardwearing, yet flexible. It is also resistant to chemicals, extreme temperatures and ultraviolet light. However, these properties also make it difficult to bond. Stormoprene (A3703) ensures a strong bond because it has been developed to take into account the unique properties of Hypalon.

Withstands extreme environmental conditions: heat, chemical and water-resistant
Many Hypalon products are subject to wear and tear; boats, marine fenders and dracone barges are subject to harsh treatment when in unsettled waters, whilst wet suits are placed in and out of sea water and left to dry in the sun. Most adhesives could not withstand such extreme conditions. Stormoprene (A3703) ensures a safe and secure bond in these conditions because it has a temperature resistance of -30°C - 120°C and is resistant to both sea water and chemicals.

Directions:

1. Mix components A (adhesive) & B (curing agent) for approx. five minutes. Ideally, mix in the proportions supplied or by components A & B at a ratio of 100:6 by weight.

2. Apply an even coat of the mixed adhesive to both surfaces with a brush, roller coater or serrated trowel. Allow the adhesive to dry for 5-15 minutes or until it is dry to touch.

Please note: Applying two thin coats of adhesive is preferable to ensure maximum adhesion. Leave the first coat to dry for approximately 20-30 minutes before applying the final coat. Allow the final coat to dry for 5 to 15 minutes.

3. Join the surfaces together using as much pressure as possible. This is to prevent air entrapment. Components may be handled within minutes of being bonded.

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape that is sold as individual pre-cut patches and strips of various shapes and sizes. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. TUFF Tape is very strong and can bind together items just by stretching the tape around the item and using the elasticity to pull the pieces tightly into place. When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

USES: Use TUFF Tape to quickly repair rips in waterproof clothing, ripped netting and fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC curtain sides on trucks and warehouses.

DIRECTIONS: Ensure that the surface is clean and dry before using. Cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape that is sold as individual pre-cut patches and strips of various shapes and sizes. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. TUFF Tape is very strong and can bind together items just by stretching the tape around the item and using the elasticity to pull the pieces tightly into place. When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

USES: Use TUFF Tape to quickly repair rips in waterproof clothing, ripped netting and fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC curtain sides on trucks and warehouses.

DIRECTIONS: Ensure that the surface is clean and dry before using. Cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.

Part B Activator to be used with Stormoprene Hypalon Part A Contact Adhesive (A3707).

Part B Activator to be used with Stormoprene Hypalon Part A Contact Adhesive (A3707).

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape that is sold as individual pre-cut patches and strips of various shapes and sizes. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. TUFF Tape is very strong and can bind together items just by stretching the tape around the item and using the elasticity to pull the pieces tightly into place. When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

USES: Use TUFF Tape to quickly repair rips in waterproof clothing, ripped netting and fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC curtain sides on trucks and warehouses.

DIRECTIONS: Ensure that the surface is clean and dry before using. Cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.

Stormoprene Hypalon Adhesive is a specially formulated 2-part poly-chloroprene based adhesive system for high-performance bonding of Hypalon and other natural and synthetic rubber surfaces that require high strength bonds for use in demanding applications.

Formulated for use in the manufacture and repair of RIBs, inflatable boats, liferafts, diving suits, wet suits and other marine and industrial applications that specify resistance to salt water, oil, fuels etc. 

• Easy to mix two part system supplied with Activator/curing agent.
• Easy to apply by brush or roller.
• Contact bonds in 10-15 minutes, full cure 48 hours.
• Shelf life: 3-12 months unopened tin, mixed adhesive has pot life of 3-4 hours

You can use just the glue (as a single component glue) on many fabrics, but the activator must be mixed with the adhesive when used to stick Hypalon fabric.

Securely bonds Hypalon: developed specifically for bonding Hypalon
Hypalon is ideal for creating marine products because it is hardwearing, yet flexible. It is also resistant to chemicals, extreme temperatures and ultraviolet light. However, these properties also make it difficult to bond. Stormoprene (A3703) ensures a strong bond because it has been developed to take into account the unique properties of Hypalon.

Withstands extreme environmental conditions: heat, chemical and water-resistant
Many Hypalon products are subject to wear and tear; boats, marine fenders and dracone barges are subject to harsh treatment when in unsettled waters, whilst wet suits are placed in and out of sea water and left to dry in the sun. Most adhesives could not withstand such extreme conditions. Stormoprene (A3703) ensures a safe and secure bond in these conditions because it has a temperature resistance of -30°C - 120°C and is resistant to both sea water and chemicals.

Directions:

1. Mix components A (adhesive) & B (curing agent) for approx. five minutes. Ideally, mix in the proportions supplied or by components A & B at a ratio of 100:6 by weight.

2. Apply an even coat of the mixed adhesive to both surfaces with a brush, roller coater or serrated trowel. Allow the adhesive to dry for 5-15 minutes or until it is dry to touch.

Please note: Applying two thin coats of adhesive is preferable to ensure maximum adhesion. Leave the first coat to dry for approximately 20-30 minutes before applying the final coat. Allow the final coat to dry for 5 to 15 minutes.

3. Join the surfaces together using as much pressure as possible. This is to prevent air entrapment. Components may be handled within minutes of being bonded.

Stormsure ’TUFF Tape’ is a very strong, clear, self-adhesive, waterproof tape that is sold as individual pre-cut patches and strips of various shapes and sizes. TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture. It stretches and is elastic and it can withstand both heat and extreme cold without losing all its useful characteristics. TUFF Tape is very strong and can bind together items just by stretching the tape around the item and using the elasticity to pull the pieces tightly into place. When TUFF tape is applied to clothing it will go through regular washing machine cycles unaffected.

USES: Use TUFF Tape to quickly repair rips in waterproof clothing, ripped netting and fabrics, inflatable mattresses, canoes and RIBs, tents and awnings, sails and kites, waders, cracked buckets and other plastic containers, PVC curtain sides on trucks and warehouses.

DIRECTIONS: Ensure that the surface is clean and dry before using. Cut a suitable sized piece of TUFF Tape for your repair using good quality scissors or a sharp scalpel blade. Peel off the backing paper. Carefully position and then apply the TUFF Tape directly on top of the damage. Start at one edge and press the tape down gradually to avoid the entrapment of air bubbles. Once the TUFF Tape is in place rub it firmly with a smooth and hard object (such as the back of a spoon) to ensure the maximum adhesion to the substrate.