Arts & Crafts

A tube of Remo Tip Top Vulcanising cement and 2 Remo black vulanised rubber patches. These are the best patches and glue you can get and the best for making permenent repairs on vulcanised rubber material. They work very well on car and bicycle tyre inner tubes and some rubber boots which are made from vulcanised rubber.

Use Stormsure Flexible Repair Adhesive if the material is not vulcanised rubber.

Quick setting. Usable in just a few minutes.

Hand Mouldable Thermoplastic Pellets

Polymorph is a hand mouldable thermoplastic, which comes in the form of 2mm white beads.

Directions

Place a spoonful beads in a cup and add boiling water. The beads quickly melt together and become transparent. The melted plastic can be moulded by hand, rolled out into sheets and stuck onto many surfaces.

Polymorph can be reheated and remelted and reused many times over, so it is fully recyclable.

Cut it, drill it, stick it!

Melts at 62ºC in hot water or any other heat source. Non-toxic.

Mould it into the shape you need and let it cool to room temperature. Recycle it many times by reheating.

Polymorph is used in a variety of adhesive applications. It complies with EN13432.

The Science

Polymorph is >99% epsilon caprolactone polyester with 1,4 butanediol.

Stormsure polymorph is a linear polycaprolactone (PCL) monomer grade with high molecular weight (about 50,000).

It is also at printable grade, exhibiting very good biodegradability and resistance to tear, moisture and impact.

Multiple Uses

Provides flexibility, enhanced durability, high elongation and excellent low temperature performance.

Offers strong adhesion to substrates, enhanced biopolymer performance, compatibility with a wide range of common thermoplastics and solubility in several common solvents.

Hand Mouldable Thermoplastic Pellets

Polymorph is a hand mouldable thermoplastic, which comes in the form of 2mm white beads.

Directions

Place a spoonful beads in a cup and add boiling water. The beads quickly melt together and become transparent. The melted plastic can be moulded by hand, rolled out into sheets and stuck onto many surfaces.

Polymorph can be reheated and remelted and reused many times over, so it is fully recyclable.

Cut it, drill it, stick it!

Melts at 62ºC in hot water or any other heat source. Non-toxic.

Mould it into the shape you need and let it cool to room temperature. Recycle it many times by reheating.

Polymorph is used in a variety of adhesive applications. It complies with EN13432.

The Science

Polymorph is >99% epsilon caprolactone polyester with 1,4 butanediol.

Stormsure polymorph is a linear polycaprolactone (PCL) monomer grade with high molecular weight (about 50,000).

It is also at printable grade, exhibiting very good biodegradability and resistance to tear, moisture and impact.

Multiple Uses

Provides flexibility, enhanced durability, high elongation and excellent low temperature performance.

Offers strong adhesion to substrates, enhanced biopolymer performance, compatibility with a wide range of common thermoplastics and solubility in several common solvents.

1m strip of nylon tape with hot melt adhesive on the back.

Model name: T-2000X

Size: 22mm x 1m

Colour: Dark grey

Directions: Seal into position with a hot iron to cover glued and stitched seams on wetsuits and dry suits, for a perfect finish.

Any length Available up to 50m

A versatile tape coated with strong adhesive on both sides, easy to tear and special backing paper makes application easier. Ideal for mounting displays, crafts, and more.

It's all about Stormsure Flexible Repair Adhesive

How to Repair using Polyurethane Adhesive

Stormsure Flexible Repair Adhesive is a polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

• Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.
• Bonds to virtually all surfaces. It allows bonding wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.
• Stormsure is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials
• Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use.
• The glue is transparent so it won't normally discolour the objects you need to join.
• Always check for compatibility on fabrics in an inconsipcuous area before making a major repair. It is used for repairs and construction where a very high connection strength is required. It can be used indoors and outdoors and will last for a long time under water too.
• Complete curing time: 10-12 hours. Resistent to temperatures from -30°C to +80°C.
• How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.
• TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. Cured clear adhesive may change to a pale yellow colour when exposed to bright light.

The Science

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15°C - 25°C for best results). Do not use below 5°C.  If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a transparent liquid again and it will work fine. 

This adhesive is a single component moisture curing product.  It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes.

What is it used for?

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Other Characteristics

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

• Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.
• Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding.
• Comes in White, Clear, Khaki and Black. It is used for repairs and constructions where a very high connection strength is required and can be used indoors, outdoors and gor repairs that will be under water..
• This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

How To Use Stormsure

Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 24 hours.

Conclusion

Despite the marginally higher cost of polyurethane adhesives, they do offer plenty of worthwhile benefits. They are well suited for use with a variety of different materials, and their strong adhesion allows single-sided application. Polyurethane adhesives are easy to work with. Polyurethane adhesives are also highly resistant to the elements and can endure heavy contact and impact.

What is Silicone?

• Stormsure Silicone is a Non-Staining No Oily Residue Silicone Adhesive and Sealant (Not all silicone adhesives are non-staining).

• Highly water repellent

• Highly resistant to weathering and ageing

• Electrically insulating Environmentally friendly, both in its production and in its application

• Resistant to many acids and other chemicals

Using silicone as a seam sealer: This type of sealer is ideal for outdoor gear and clothing made from synthetic materials. It's waterproof and flexible, making it ideal for sealing seams exposed to rain and other elements.

It is also ideal for sealing brickwork, tiles, slabs and concrete.

Advantages and Disadvantages of Silicone-Based Adhesives

A silicone rubber adhesive offers the user many different advantages:

PROS

• Temperature-resistant in a range from -85° to 572° Fahrenheit (-65° to 300° Celsius).

• Suitable for outdoor and indoor use

• Waterproof

• High UV and weathering resistance

• Highly elastic, making it suitable for bonding materials with different coefficients of thermal expansion, as well as for bonding vibrating parts Electrical non-conductor

CONS

Cannot withstand very high vibrations and strong movement loads in the long term due to its elasticity

One-component silicone adhesives generally not suitable for high-strength bonding that must withstand large loads on a permanent basis – over time, the silicone may wear and come loose

Cannot be painted over Produce an unpleasant odour of vinegar during curing phase

What is it used for?

The areas of application for silicone adhesives are diverse. For example, materials can be reliably bonded together, especially outdoors, where the adhesive seam must be weather-resistant and waterproof. Bonding and attaching tiles is also no problem with a silicone rubber adhesive. The following materials are reliably bonded with silicone-based glues:

• Outdoor gear and clothing made from synthetic materials

• Sealing seams exposed to rain and other elements

• Wood

• Glass

• Various plastics

• Metal

• Ceramics

• Enamel

• Paper and cardboard

• Brickwork, tiles, slabs, concrete

• Bathroom and kitchen sealant

Many users place particular emphasis on the ease of processing and flexibility of silicone, which is ideal for bonding substrates that are permanently exposed to vibrations or temperature fluctuations, such as:

• Parts on automobiles

• Fastening of illuminant parts

• Computer components

• Kitchen parts, for example on ovens or other electrical appliances

Preparation

Before you can bond the silicone, you must clean the substrates thoroughly. These must be free of any dirt, dust, oil, and grease. Any old grout must also be removed before you can bond new tiles with silicone, for example. The tiles to be laid or the other substrates can be cleaned with by rinsing it with water, but also with isopropanol or acetone.

Allow the surfaces to dry completely before starting the silicone bonding process. If the substrates show very uneven areas, these must still be filled or the surrounding raised areas must be ground down. Silicone is not suitable for bridging large gaps during the bonding process.

The Bonding Process

Before you apply the silicone adhesive to the actual substrates, it is recommended that you practice on a piece of cardboard. If the handling works well, you can apply the silicone to the substrates. Silicone can now be applied to one side of the entire surface to be bonded. If it is a large area, set the silicone more generously, but not too thickly. You can spread it out using a spatula.

Curing time should be 4-6 hours. But leave for 24 hours for complete cure.

The Finish

Stormsure is a NON-Staining Silicone Adhesive and Sealant.

Click here to read more on how to use Stormsure Silicone as a sealant

Quickly repair and Waterproofing of seams and needle holes on tents, bivvys, waterproof clothing and anything else that has non-watertight seams.

Stormseal is a water-based aqueous styrene-acrylic type polymer dispersion seam sealer. The liquid soaks into pinholes and leaking seams and dries clear, leaving a flexible and impermeable waterproof surface. 

Contains no VOC’s and is non-toxic. Can be washed off before it has dried. 

Test on a small area first to check compatibility.

This bottle (100ml) should cover 12m of seam (1” wide seam).

Directions

Shake bottle well. Remove cap. Pour Seam Sealer into suitable container, cup or dish.

Use brush supplied to apply as a film directly onto and covering the seam stitching or hole. Stormseal will soak into the stitching or hole. Allow to cure for 15-25 minutes or until clear and dry.

Dries in a few minutes. Dries clear and transparent. Remains flexible and waterproof!

It's all about Stormsure Flexible Repair Adhesive

The Stormsure Flexible Repair Adhesive White (15g) is a versatile, high-strength adhesive designed for a wide array of repair needs. This clear adhesive is perfect for a multitude of applications, offering a flexible, waterproof, and durable bond. It's ideal for repairing items like outdoor gear, footwear, inflatable items, tents, and much more, ensuring a reliable and long-lasting fix. Especially white items where the black adhesive can create an invisible repair. 

Key Features:

• Strong and Flexible Bond: Provides a robust bond that remains flexible once cured, ideal for materials that need to retain elasticity.
• Clear Formula: The adhesive dries clear, making it suitable for repairs where appearance is important, leaving a clean and unobtrusive finish.
• Waterproof and Durable: Once cured, the adhesive creates a waterproof seal, making it perfect for outdoor and water-related repairs.
• Multipurpose Use: Ideal for repairing a wide range of materials, including rubber, leather, PVC, neoprene, canvas, and various fabrics.
• Easy Application: The tube allows for precise application, making it simple to apply the right amount of adhesive exactly where it's needed.

Benefits:

• Versatile Repair Solution: Suitable for everything from patching a tent to fixing a shoe sole or mending an inflatable pool toy.
• Cost-Effective: Saves money by enabling easy repairs instead of needing to replace damaged items.
• Long-Lasting Repairs: Offers a durable solution that withstands wear and tear, as well as exposure to the elements.
• User-Friendly: Easy to use for both quick fixes and more complex repairs.

How to Use:

1. Ensure the surface to be repaired is clean and dry.
2. Apply the adhesive directly to the damaged area.
3. If necessary, press the two surfaces together and remove any excess adhesive.
4. Allow to cure for 24-48 hours (depending on conditions) for optimal strength.

The Stormsure Flexible Repair Adhesive White (15g) is an essential tool for any repair kit, whether at home, in the workshop, or on the go. It's a go-to solution for a diverse range of repair tasks, ensuring that your gear and items remain functional and well-maintained, saving time and money in the long run.

 5 litre container of white PVA glue. Ideal for crafts and school use. A standard wood glue

Uses:

• as wood glue, PVAc is known as "white glue" and the yellow as "carpenter's glue".
• as paper adhesive during paper packaging conversion
• in bookbinding and book arts, due to its flexible strong bond and non-acidic nature (unlike many other polymers). The use of PVAc on the Archimedes Palimpsest during the 20th century greatly hindered the task of disbinding the book and preserving and imaging the pages in the early 21st century, in part because the glue was stronger than the parchment it held together.^[6]
• in handicrafts
• as envelope adhesive
• as wallpaper adhesive
• as a primer for drywall and other substrates

BLACK AIR BRUSH BRAIDED HOSE WITH 1/8" BSP

1/8" SWIVEL FITTING AIR BRUSH RUBBER

BRAIDED AIR HOSE 3 METRE.
This braided air hose is supplied with the fittings necessary to connect to all Iwata airbrushes and the EW-440 / bd-128p / bd-132 and many, many more (all apart from the tiny 5mm badger fitting).
The hose connects directly to the airbrush one end with a 1/8" BSP - 1/8" BSP swivel nut.
The other nut is for connection to your compressor or air supply.

Tesa 4323 general purpose paper masking tape is finely creped with a natural rubber adhesive.

Contains our special adhesive for fixing PVC patches. These are great for patching over holes and leaks on paddling pools and other items made from PVC. You need to have a patch of suitable material.

Make up you own repair kits

PVc glue can also be used for a host of other jobs as it contains both a voltile solvent for dissolving pvc and polyurethane for extra strength.  It does not have  quite the same charactheristics as Stormsure adhesive however.

It's all about Stormsure Flexible Repair Adhesive

The Stormsure Flexible Repair Adhesive Khaki (15g) is a versatile, high-strength adhesive designed for a wide array of repair needs. This clear adhesive is perfect for a multitude of applications, offering a flexible, waterproof, and durable bond. It's ideal for repairing items like outdoor gear, footwear, inflatable items, tents, and much more, ensuring a reliable and long-lasting fix. Especially khaki or brown items where the black adhesive can create an invisible repair. 

Key Features:

• Strong and Flexible Bond: Provides a robust bond that remains flexible once cured, ideal for materials that need to retain elasticity.
• Clear Formula: The adhesive dries clear, making it suitable for repairs where appearance is important, leaving a clean and unobtrusive finish.
• Waterproof and Durable: Once cured, the adhesive creates a waterproof seal, making it perfect for outdoor and water-related repairs.
• Multipurpose Use: Ideal for repairing a wide range of materials, including rubber, leather, PVC, neoprene, canvas, and various fabrics.
• Easy Application: The tube allows for precise application, making it simple to apply the right amount of adhesive exactly where it's needed.

Benefits:

• Versatile Repair Solution: Suitable for everything from patching a tent to fixing a shoe sole or mending an inflatable pool toy.
• Cost-Effective: Saves money by enabling easy repairs instead of needing to replace damaged items.
• Long-Lasting Repairs: Offers a durable solution that withstands wear and tear, as well as exposure to the elements.
• User-Friendly: Easy to use for both quick fixes and more complex repairs.

How to Use:

1. Ensure the surface to be repaired is clean and dry.
2. Apply the adhesive directly to the damaged area.
3. If necessary, press the two surfaces together and remove any excess adhesive.
4. Allow to cure for 24-48 hours (depending on conditions) for optimal strength.

The Stormsure Flexible Repair Adhesive Khaki (15g) is an essential tool for any repair kit, whether at home, in the workshop, or on the go. It's a go-to solution for a diverse range of repair tasks, ensuring that your gear and items remain functional and well-maintained, saving time and money in the long run.

Works great on photos, Models, Prototypes, Foam Board & Paper.

• Acid Free
• Photo Safe
• Permanent
• Quick, Easy & Clean
• Disposable, Non-refillable

A small, stiff bristled brush ideal for spreading thin layers of adhesive over a wide area.

HMG B72 Acrylic Adhesive is touch dry in 3-5 minutes, surface dry in 1 hour and hard dry in around 6 hours.

Not having instant grab, fragments can be easily re-adjusted and surplus adhesive removed with acetone, making any joint virtually invisible. 

A strong balsa cement that is fuel proof once dry Use for balsa wood and other light woods Fast drying

Usage
A quick drying transparent cement for balsa, other soft woods and cork.

Substrate
Balsa, other soft woods and cork.

Coverage
Depends on thickness of application.

Application
Directly onto substrate.

Drying time
20-30 minutes. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity.

How to clean:
Excess cement should be wiped away using a damp cloth. Product is permanent once dry.

It's all about Stormsure Flexible Repair Adhesive

How to Repair using Polyurethane Adhesive

Stormsure Flexible Repair Adhesive is a polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

• Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.
• Bonds to virtually all surfaces. It allows bonding wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.
• Stormsure is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials
• Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use.
• The glue is transparent so it won't normally discolour the objects you need to join.
• Always check for compatibility on fabrics in an inconsipcuous area before making a major repair. It is used for repairs and construction where a very high connection strength is required. It can be used indoors and outdoors and will last for a long time under water too.
• Complete curing time: 10-12 hours. Resistent to temperatures from -30°C to +80°C.
• How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately and press firmly together and immobilize for at least 24 hours.
• TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. Cured clear adhesive may change to a pale yellow colour when exposed to bright light.

The Science

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15°C - 25°C for best results). Do not use below 5°C.  If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a transparent liquid again and it will work fine. 

This adhesive is a single component moisture curing product.  It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes.

What is it used for?

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Other Characteristics

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

• Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.
• Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding.
• The glue is transparent. It is also available in White, Khaki and Black. It is used for repairs and constructions where a very high connection strength is required and can be used indoors, outdoors and gor repairs that will be under water..
• This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

How To Use Stormsure

Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

Conclusion

Despite the marginally higher cost of polyurethane adhesives, they do offer plenty of worthwhile benefits. They are well suited for use with a variety of different materials, and their strong adhesion allows single-sided application. Polyurethane adhesives are easy to work with. Polyurethane adhesives are also highly resistant to the elements and can endure heavy contact and impact.

It's all about Stormsure Flexible Repair Adhesive

How to Repair using Polyurethane Adhesive

Stormsure Flexible Repair Adhesive is a polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

• Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.
• Bonds to virtually all surfaces. It allows bonding wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.
• Stormsure is a liquid polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials
• Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use.
• The glue is transparent so it won't normally discolour the objects you need to join.
• Always check for compatibility on fabrics in an inconsipcuous area before making a major repair. It is used for repairs and construction where a very high connection strength is required. It can be used indoors and outdoors and will last for a long time under water too.
• Complete curing time: 24 hours. Resistent to temperatures from -30°C to +80°C.
• How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.
• TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. 

The Science

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15°C - 25°C for best results). Do not use below 5°C.  If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a liquid again and it will work fine. 

This adhesive is a single component moisture curing product.  It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes.

What is it used for?

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Other Characteristics

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

• Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.
• Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding.
• The glue is black. It is also available in White, Khaki and Clear. It is used for repairs and constructions where a very high connection strength is required and can be used indoors, outdoors and gor repairs that will be under water..
• This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

How To Use Stormsure

Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

Conclusion

Despite the marginally higher cost of polyurethane adhesives, they do offer plenty of worthwhile benefits. They are well suited for use with a variety of different materials, and their strong adhesion allows single-sided application. Polyurethane adhesives are easy to work with. Polyurethane adhesives are also highly resistant to the elements and can endure heavy contact and impact.

100m roll of nylon tape with hot melt adhesive on the back.

Model name: T-1025

Size: 22mm x 100m

Colour: Dark grey

Composition: Woven Nylon tricot with PU coating and hot melt adhesive.

Melt Range: 110-130°C

Wash: 40°C

Directions: Seal into position with a hot iron to cover glued and stitched seams on wetsuits and dry suits, for a perfect finish.